Sunday, September 1, 2024
| Time | Event | (+) |
| 15:00 - 20:00 | On-site registration opening | |
| 20:00 - 22:00 | Young tribologists event |
Monday, September 2, 2024
| Time | Event | (+) |
| 08:00 - 09:00 | Registration - Main hall | |
| 09:00 - 09:10 | Opening and Welcome address (Plenary room - Saint Maur & Essart) | |
| 09:10 - 10:00 | Tribological challenges for European space exploration: A journey summary from past to actual and future solutions (Plenary room - Saint Maur & Essart) - Lionel Gaillard (ESA, The Netherlands) | |
| 10:00 - 10:50 | How an earthquake is born? A laboratory perspective on the stability of frictional sliding (Plenary room - Saint Maur & Essart) - Marco Scuderi (University La Sapienza, Roma, Italy) |
|
| 10:50 - 11:20 | Coffee break (Poster and Exhibition room) | |
| 11:20 - 12:20 | Space Lubrication - 1 (Plenary room - Saint Maur & Essart) | (+) |
| 11:20 - 11:40 | › Application of PEEK Composite to Sliding Mechanisms in Space - Koji Matsumoto, Japan Aerospace Exploration Agency, Japan | |
| 11:40 - 12:00 | › The Development of Passivated MoS2 Coatings for Space Applications - Liuquan Yang, University of Leeds, United Kingdom | |
| 12:00 - 12:20 | › Low Wear Capabilities of Ni-Based Bulk Metallic Glass under Rolling/Sliding Unlubricated Conditions in Air and Vacuum - Guillaume Colas, Université de Franche-Comté, CNRS, institut FEMTO-ST, France | |
| 11:20 - 12:20 | 3rd Bodies - 1 (Room 3 - Amphitheater) | (+) |
| 11:20 - 11:40 | › A Pin-On-Disc Study of Particles Emitted During the Tire Rubber and Road Aggregates Wear Test - Stepan Bobrovnikov, Laboratoire Environnement, Aménagement, Sécurité et Eco-conception, France | |
| 11:40 - 12:00 | › Effect of Microstructural Changes on Tribological Mechanisms in Automotive Friction Braking Conditions - Mathis Briatte, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013, France | |
| 12:00 - 12:20 | › A Granular Model of Stick-Slip in Laboratory Earthquakes - Guilhem Mollon, Laboratoire de Mécanique des Contacts et des Structures, INSA Lyon, France | |
| 11:20 - 12:20 | Machine Learning - 1 (Room 4 - Le Chateau) | (+) |
| 11:20 - 11:40 | › Machine Learning Interaction Potentials for Tribochemistry: an Application to Alkyl Thiolate at Sliding Copper Interfaces - Paolo Restuccia, Dipartimento di Fisica e Astronomia - Department of Physics and Astronomy, Università di Bologna, Italy | |
| 12:00 - 12:20 | › Ab Initio Informed Machine Learning Potential for Tribochemistry and Mechanochemistry: Application for Lubricant Additives - Paolo Restuccia, Dipartimento di Fisica e Astronomia - Department of Physics and Astronomy, Università di Bologna, Italy | |
| 12:20 - 12:30 | Group Picture | |
| 12:30 - 13:50 | Lunch (Restaurant) | |
| 13:50 - 15:30 | Friction & Wear - 1 (Room 1 - Saint Maur) | (+) |
| 13:50 - 14:10 | › Synergistic Effects of PTFE and Nano-Al2O3 Fillers on Self-Lubricity of POM Polymer-Matrix Nanocomposite - NO SHOW - Ibrohim Rustamov, Loctek Ergonomic Technology Corp. & Faculty of Mechanical Engineering and Mechanics, Ningbo University | |
| 14:10 - 14:30 | › Solid Lubrication of Nanocomposite Ceramic Si3N4-Si3N4 and Hybrid Si3N4-Steel Contacts - Kostyantyn Grinkevych, Eduardo Torroja Institute of Construction Sciences, CSIC (IETCC-CSIC), Spain, and I.M. Frantsevich Institute for Problems of Materials Science, NAN Ukraine | |
| 14:30 - 14:50 | › Tribological Behavior of Polymer/Metal Friction Pairs in the Simulated Deep Sea - Hao Liu, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 14:50 - 15:10 | › Surface Modification and Solid Lubricant Compounding of High-Strength Brass Alloy by Friction Stir Processing - Masaya Hirukawa, Tokyo University of Science, Japan | |
| 15:10 - 15:30 | › Evolution of surface roughness in some tribological contacts - Krzysztof Kubiak, University of Leeds, United Kingdom | |
| 13:50 - 15:30 | Lubricant Additives - 1 (Room 2 - Essarts) | (+) |
| 13:50 - 14:10 | › Insight into the Fundamental Behaviour of Organic Friction Modifiers through Synchrotron X-Ray Experiments - Inga Kicior, European Synchrotron Radiation Facility, France & University of Leeds, United Kingdom | |
| 14:10 - 14:30 | › Tribological Performance Evaluation of Ti3C2Tx MXene as Lubricant Additive in Presence of Organic Friction Modifier - Afrina Khan Piya, University of Leeds, United Kingdom | |
| 14:30 - 14:50 | › Tribofilm Printing of ZDDP and APTES Using Sliding Contacts - Alaaeddin Al Sheikh Omar, University of Leeds, United Kingdom | |
| 14:50 - 15:10 | › Structure of Organic Friction Modifiers Tribofilm in Reciprocating Conditions - Marjan Homayoonfard, University of Leeds, United Kingdom | |
| 15:10 - 15:30 | › Tribological Evaluation of Micro-Algae Oils as Green and Sustainable Additives for Low-Viscosity Lubricants - Carlos C. Rubio-Hernández, Tecnológico de Monterrey = Monterrey Institute of Technology, Mexico | |
| 13:50 - 15:30 | Green Tribology - 1 (Room 3 - Amphitheater) | (+) |
| 13:50 - 14:10 | › Water-based Lubricants with Graphene Oxide Additives for Enhanced Friction and Wear Performance - CANCELLED - Mohammad Reza Najjari Saadatabadi, Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, United Kingdom | |
| 14:10 - 14:30 | › Tribology of Emerging Water Based Lubricants and Low Viscosity Oils E-Fluids Technologies in Rolling/Sliding Contacts - Christine Matta, SKF B.V., Research and Technology Development Center, Houten, The Netherlands | |
| 14:30 - 14:50 | › Effects of Tannic Acid Induced Complex Films on Tribological Properties between Rail and Wheel in Railways - Kazuki Ikoma, Railway Technical Research Institute, Japan | |
| 14:50 - 15:10 | › Triboemission of Nanoparticle Aerosols - Roman Nevshupa, Eduardo Torroja Institute of Construction Sciences, CSIC (IETCC-CSIC), Spain | |
| 15:10 - 15:30 | › Nanostructured Biogrease Performance to Wheel/Rail Contact Application - Salete Alves, Universidade Federal do Rio Grande do Norte, Brazil | |
| 13:50 - 15:30 | Modelling - 1 (Room 4 - Le Chateau) | (+) |
| 13:50 - 14:10 | › Atomic-Scale Modelling of Lubricants at High Pressure: on the Competition of Shear Thinning, Thermal Thinning and Wall Slip - Michael Moseler, Fraunhofer IWM, MikroTribologie Centrum, Germany | |
| 14:10 - 14:30 | › Prevention of Cage Wear in Cylindrical Roller Bearings by Reducing Roller Mass - Daisuke Suzuki, Railway Technical Research Institute, Japan | |
| 14:30 - 14:50 | › Comparison of a Viscoelastic and a Couple Stress Model in a Simple Slider Bearing - John Tichy, Rensselaer Polytechnic Institute, United States | |
| 14:50 - 15:10 | › Lubricant Transport in Piston Cylinder Assemblies - Polychronis Dellis, National Technical University of Athens, School of Mechanical Engineering, Greece | |
| 15:10 - 15:30 | › Empirical Compensation of Parasitic Bearing Friction in Chain Drive Dynamometers - George C. Barnaby, University of Bristol, United Kingdom | |
| 15:30 - 16:00 | Coffee break (Poster and Exhibition room) | |
| 16:00 - 17:00 | Space Lubrication - 2 (Room 1 - Saint Maur) | (+) |
| 16:00 - 16:20 | › Novel MoSx and a-C/MoSx hybrid coatings by vacuum arc deposition for use in dry air and high vacuum - Volker Weihnacht, Fraunhofer Institute for Material and Beam Technology, Germany | |
| 16:20 - 16:40 | › MoS2 Lubricating Film Meets Supramolecular Gel: a Novel Composite Lubricating System for Space Applications - Meirong Cai, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 16:40 - 17:00 | › Tribological Behavior of Environmentally-Friendly MoS2-Based Solid Lubricants at Cold Temperature - Parastoo Fallah, Concordia University, Montreal, Canada | |
| 16:00 - 17:00 | Surface Topography - 1 (Room 2 - Essarts) | (+) |
| 16:00 - 16:20 | › On Wear Behavior of Mn-Modified Al-Cu-Mg-Si-Ti Alloy Fabricated by Laser Powder-Bed Fusion - Nan Kang, Arts et Métiers Institute of Technology, MSMP, HESAM Université, France | |
| 16:20 - 16:40 | › The Reciprocating Sliding Friction Behavior and Wear State Transition Mechanism of Cylinder Liner and Piston Ring - Xuan Ma, Harbin Engineering University, China | |
| 16:40 - 17:00 | › Analysis of Multimodal Experimental Data for Physical Understanding of Emissions Mechanisms during Braking Events - Philippe Dufrénoy, Univ. Lille, CNRS, Centrale Lille, UMR 9013 - LaMcube, France | |
| 16:00 - 17:00 | Biotribology - 1 (Room 3 - Amphitheater) | (+) |
| 16:00 - 16:20 | › Frequency Modulation Effect of Fingerprints Mediates the Sensitive Perception - Linfeng Wang, Nanjing University of Aeronautics and Astronautics, China | |
| 16:20 - 16:40 | › Misleading Tactile Perception by Vibrotactile Rendering - Livia Felicetti, Sapienza - University of Rome, Italy & LaMCoS, INSA Lyon, France | |
| 16:40 - 17:00 | › Multimodal Tactile Sensor Aiming at Smart Space Extravehicular Multi-Finger Operations based on Finger Tribology - Kaixuan Kong, Nanjing University of Aeronautics and Astronautics, China | |
| 16:00 - 17:00 | Modelling - 2 (Room 4 - Le Chateau) | (+) |
| 16:00 - 16:20 | › The Tire-Road Contact: a Mechanical Mixing Seen as a Shear-Induced Diffusive Process - Kévin Daigne, LaMCoS, INSA Lyon, France | |
| 16:20 - 16:40 | › Friction and Wear Mechanisms of PTFE by Atomistic Simulations: Transfer Film Formation and the Synergy Between PTFE and PEEK - Stefan Peeters, Fraunhofer Institute for Mechanics of Materials, Germany | |
| 16:40 - 17:00 | › The Role of Grain Fragmentation in Understanding Shear Localization via DEM Simulation - Nathalie Casas, Dipartimento di Scienze della Terra, La Sapienza Università di Roma, Italy | |
| 17:00 - 17:10 | Short break (switch sessions) | |
| 17:10 - 18:10 | Friction & Wear - 2 (Room 1 - Saint Maur) | (+) |
| 17:10 - 17:30 | › A State-of-the-Art Tribometer for Real Conditions with Superheated Water (Real Conditions In Nuclear Environment) - Bogdan Munteanu, IREIS, France | |
| 17:30 - 17:50 | › The Effect of Lubricant Contamination with Water on Friction Modifiers Tribofilm Properties - Ajay Pratap Singh Lodhi, University of Leeds, United Kingdom | |
| 17:50 - 18:10 | › Investigation of Environmentally Acceptable Base Oil/Additive Combinations with Regard to their Functional Requirements - Marius Bürger, Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Germany | |
| 17:10 - 18:10 | Surface Topography - 2 (Room 2 - Essarts) | (+) |
| 17:10 - 17:30 | › Influence of Jets at Subzero Temperatures on the Behavior of Erosive Wear and Ductility on AISI 310 Stainless Steel - César Sedano, Universidad de Guadalajara, Mexico | |
| 17:30 - 17:50 | › Influence of Interstitial Oxygen and Nitrogen on the Tribological Behaviour of Titanium and Ti6Al4V - Amod Kashyap, Institute for Applied Materials, Karlsruhe Institute of Technology, Germany | |
| 17:50 - 18:10 | › Interfacial Thermal Conductance across Solid/Liquid Interface - Andrea Zovko, Department of Mechanical Engineering, Imperial College London, United Kingdom | |
| 17:10 - 18:10 | Nanotribology (Room 3 - Amphitheater) | (+) |
| 17:10 - 17:30 | › Insights into the Nanoscale Tribological Properties of Graphite in Water - Jitendra Soni, Indian Institute of Technology Delhi, India | |
| 17:30 - 17:50 | › Effect of Graphene Reinforcement on the Tribological and Fracture Behaviours of Silicon-Based Nanocomposites - Hussein Abo El-Einein, LTDS UMR CNRS 5513, Ecole Centrale de Lyon, France | |
| 17:50 - 18:10 | › Role of Crystallographic Orientation and Temperature on Tribological Characteristics of CoCrNi Medium Entropy Alloy - Vamsi Majeti, Indian Institute of Technology Delhi, India | |
| 17:10 - 18:10 | Modelling - 3 (Room 4 - Le Chateau) | (+) |
| 17:10 - 17:30 | › A BEM-Based Model for Wear in the Contact of Textile Fibres - Josh Montgomery, University of Leeds, United Kingdom | |
| 17:30 - 17:50 | › Mechanism of Frictional Contact Induced Vibration of TBM Cutterhead-Cutter System - Mengqi Zhang, Southwest Jiaotong University, China | |
| 17:50 - 18:10 | › Instabilities in Sliding Systems Induced by Solid Viscoelasticity - Toshiki Watanabe, Yokohama National University, Japan | |
| 18:30 - 19:30 | Special talk: Tribology and Wine: What’s the Connection? (Room 3 - Amphitheater) - N. Spencer |
|
| 19:30 - 23:30 | Buffet during poster session (Poster and Exhibition room) | |
| 19:30 - 23:30 | Poster - Lubricated Contacts (Poster and Exhibition room) | (+) |
| 19:30 - 23:30 | › Effect of Kinetics of MoS2 Sheets Formation and Organization on Tribological Behavior of Lubricated Contacts using MoDTC Additive - Mathilde Verduno, LTDS, CNRS, Ecole Centrale de Lyon, France | |
| 19:30 - 23:30 | › Influence of a Transmission Oil Degradation on System-level Behavior - Busra Duran, SKF France | |
| 19:30 - 23:30 | › Lubrication Condition Monitoring in EHD Line Contacts using the Electrical Impedance Method - Taisuke Maruyama, NSK Ltd., Japan | |
| 19:30 - 23:30 | › Effect of Chain Length on Tribological Performances of MXene Solvent-Free Nanofluids as Additives for Water-Based Lubricants - Zhangpeng Li, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 19:30 - 23:30 | › Neutron Reflection Characterisation of Ionic Liquid Additive Adsorption at Steel/Water Interface for Water-Based Lubrication - Xuzhi Hu, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China & University of Manchester, United Kingdom | |
| 19:30 - 23:30 | › A Reynolds-type Equation for Bearings with Stochastic Roughness under Elastohydrodynamic Lubrication - Dimitrios Skaltsas, National Technical University of Athens, Greece | |
| 19:30 - 23:30 | › Experimental Investigations on Spin Power Losses Generated in a Planetary Gear Set - Marie Winger, LabECAM, ECAM LaSalle & LaMCoS, INSA Lyon & Safran Transmission Systems, France | |
| 19:30 - 23:30 | › A Study on Hydrogen Concentration in the Crank Case of a Hydrogen Internal Combustion Engine - Daisuke Hiyama, Tokyo City University, Japan | |
| 19:30 - 23:30 | › Advanced Electro-Tribological and Electro-Rheological Testing of Grease Lubricated Ball Bearings – from Impedance to Break Down Voltage - Paul Staudinger, Anton Paar GmbH, Austria | |
| 19:30 - 23:30 | › Viscosity Measurement In-Situ at High Pressure using Ultrasound - Gladys Peretti, The Leonardo Centre for Tribology, The University of Sheffield, United Kingdom | |
| 19:30 - 23:30 | › Application of Dielectric Spectroscopy for EHD Contact - Shunsuke Iwase, NSK Ltd. & Nagoya Institute of Technology, Japan | |
| 19:30 - 23:30 | › Evaluating Slip Effects in ElastoHydroDynamic Lubrication: Insights from Navier-Stokes Equations - Rayan Ajeeb, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia | |
| 19:30 - 23:30 | › Hybrids of Ionic Liquids and Cu-Decorated Carbon Nanotubes as Potential Superlubricants for Steel-Polymers Friction Pairs - Lukasz Wojciechowski, Poznan University of Technology, Poland | |
| 19:30 - 23:30 | › The Effect of Contaminants in Used Mining Gear Oils on the Wear of Machine Elements with Thin Antiwear Coatings - Marek Kalbarczyk, Łukasiewicz Research Network - Institute for Sustainable Technologies, Poland | |
| 19:30 - 23:30 | Poster - Wear and Damage (Poster and Exhibition room) | (+) |
| 19:30 - 23:30 | › Reciprocating Sliding Wear Behavior on Aluminum and Bronze Alloys under Dry and Lubricated Conditions - Manuel Vite-Torres, Instituto Politécnico Nacional ESIME U Zacatenco, Mexico | |
| 19:30 - 23:30 | › Evaluation of Friction and Wear of Enamel During the Loss and Recovery of Minerals Exposed to Demineralizing Liquids - Sara Topete, Universidad de Guadalajara, Mexico | |
| 19:30 - 23:30 | › Analysis of Wear Mechanisms, Microstructure Modifications of Thrust Ball Bearing under Fretting Contact and Grease Lubrication - Roderick Jacques, Cetim, Laboratoire Tribologie, Pôle Matériaux Métalliques et Surface, France. | |
| 19:30 - 23:30 | › Effect of Temperature and Load on the Behavior of Adhesive Wear on the Tire-Concrete Pavement Interaction - Elizabeth Sedano, Universidad de Guadalajara, Mexico | |
| 19:30 - 23:30 | › Sliding Wear Prediction in Wheel-Rail System under Aqueous Condition - João Vitor Silva e Silva, Federal University of Espírito Santo, Brazil | |
| 19:30 - 23:30 | › Interaction between Adhesive Wear and Noise on Tire-Concrete Pavement Contact at Different Speeds - Fernando Galvez, Universidad de Guadalajara, Mexico | |
| 19:30 - 23:30 | › Study of Erosion Wear by Solid Particle on a Carbon Steel Pipeline Section (API 5L-X52) - Javier Frias-Flores, Instituto politecnico national, Mexico | |
| 19:30 - 23:30 | › The Effect of Usage and Pad Material on the Tribological Circuit and Wear Dynamics in Friction Braking - Joseph Frangieh, LaMCube, Centrale Lille, France | |
| 19:30 - 23:30 | › Rolling Contact Fatigue Behaviour of Nitroalloy Steel (Cronidur 30) under Varied Slip Conditions - Kesavan Dhanasekaran, Indian Institute of Technology Palakkad, India | |
| 19:30 - 23:30 | › Research on the Friction and Wear Testing Machine for Simulated Ocean Environment - Hongfei Shang, Tsinghua University, China | |
| 19:30 - 23:30 | › Effects of Temperature and Load on Sliding Wear between Wheel and Rail Steels - Nathan Strey, Federal University of Espirito Santo, Brazil | |
| 19:30 - 23:30 | › Influence of the Sintering Process on the Slurry Erosion Behavior of New Fe-SiC Cermets. - Nicolás Araya, Universidad de Concepción - University of Concepcion, Chile | |
| 19:30 - 23:30 | › Influence of Water, Relative Humidity and Nitrogen Environment on Friction and Wear Performance of CuO/MoS2 Hybrid Nanoparticles in Reciprocating Sliding Contacts - Raaid Yassin, Institute of Functional Surfaces, University of Leeds, United Kingdom & North Refineries Company, Ministry of Oil, Iraq | |
| 19:30 - 23:30 | › Influence of Slide-Roll Ratio on Micropitting / Macropitting under High Load and High Speed Rolling Friction Test - Takuto Kunii, Tokyo University of Science & Rtec-Instruments K.K., Japan | |
| 19:30 - 23:30 | › Ultrasonic Monitoring of Long Term Cycling and Degradation of Lithium-Ion Batteries - Daniel Williams, University of Sheffield, United Kingdom | |
| 19:30 - 23:30 | › Investigations around Thermal and Tribological Contributions on Carbon/Carbon Composite's Wear - Hugo Bergère, LaMCoS, INSA Lyon, France | |
| 19:30 - 23:30 | › Friction and Wear Behavior of Co-based Alloys under Harsh Conditions - Patrick Beau, Beau Engineering Services & Optimol Instruments Prüftechnik GmbH, Germany | |
| 19:30 - 23:30 | › Evolution of Stress/Strain State and Contact Area of Worn Elastomers during Shearing - Antoine Mille, LTDS, CNRS, Ecole Centrale de Lyon, France | |
| 19:30 - 23:30 | Poster - Surface and Friction Science (Poster and Exhibition room) | (+) |
| 19:30 - 23:30 | › Additive Manufacturing of Intelligent and Self-Lubricating Polyimide Surfaces - Yuxiong Guo, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences & Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, China | |
| 19:30 - 23:30 | › Excitation and Attenuation of Surface Waves in Disordered Materials - Ibrahim Ghanem, Department of Microsystems Engineering, University of Freiburg, Germany | |
| 19:30 - 23:30 | › Dry Friction of Amorphous Carbon on Epitaxial Graphene: Insights and Observations - Mohammad Zarshenas, Fraunhofer Institute for Mechanics of Materials, Institute of Physics, University of Freiburg, Germany | |
| 19:30 - 23:30 | › Wettability of Complex Fractal Surfaces - Multiscale Correlation - Katarzyna Peta, Poznan University of Technology, Poland | |
| 19:30 - 23:30 | › Nonconventional Tribochemical Activation: Facing the Challenges in Non-Tribological Applications - Roman Nevshupa, Institute of Construction Science Eduardo Torroja, CSIC, Spain | |
| 19:30 - 23:30 | › Frictional Behavior of Paper Wiper in Partially Wet Conditions: Significance of Three Dimensional Wetting - Shoma Kobayashi, Tohoku University, Japan | |
| 19:30 - 23:30 | › Effect of Water Absorption on the Friction Characteristics of Coir Fibers - Sumanta Prasad Dewri, Indian Institute of Technology Madras, India | |
| 19:30 - 23:30 | › Multi-Phase and Multi-Scale Wear Model using Phonon, Quantum Chemical Molecular Dynamics and Machine Learning - Chao Zhang, Shanghai University, China | |
| 19:30 - 23:30 | › Construction of Solid-Liquid Coupling Interfaces for Ultralow Friction and Stable Drag Reduction - Wufang Yang, State Key Laboratory of Solid Lubrication, Chinese Academy of Sciences, China | |
| 19:30 - 23:30 | › Research on Friction Control by Pillar-Shaped Texturation under Lubricated Conditions - Takumi Matsuura, Tokyo University of Science, Japan | |
| 19:30 - 23:30 | Poster - Dry Contacts and Coatings (Poster and Exhibition room) | (+) |
| 19:30 - 23:30 | › Tribological and Anticorrosive Performances of Graphene Coatings on Stainless Steel Substrates Constructed by Metal Ion-Induced Self-Assembly - Jinqing Wang, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 19:30 - 23:30 | › Boundary Element Method for Periodic Phenomena, Application to the Modelling of Tire-Pavement Contact. - Nicolas Durand, LaMCoS, CNRS, INSA Lyon, France | |
| 19:30 - 23:30 | › Friction Behaviors of Tungsten Disulfide at Elevated Temperatures - Keizo Hashimoto, Teikyo University, Japan | |
| 19:30 - 23:30 | › Investigation on Asymmetric Hysteresis Friction Behavior between Wood and a Spherical Steel Pin - Yi Zheng, Delft University of Technology, The Netherlands | |
| 19:30 - 23:30 | › Enhancing the Tribological Properties of Ti6Al4V Alloy through Duplex Plasma Nitriding and MoS2 Coating - Kai Le, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 19:30 - 23:30 | › Additive Manufacturing as a Potential Method to Produce Friction Surfaces of Joint Implants: the Tribological Behaviour of Ti6Al4V - Lukáš Odehnal, Department of Tribology, Faculty of Mechanical Engineering, Brno University of Technology, Czech Republic | |
| 19:30 - 23:30 | › Friction Coefficient of Cardboard Packing Samples - Brenda Acevedo-Sanchez, Instituto Politecnico National, Mexico | |
| 19:30 - 23:30 | › Sprayed Alkylphosphonic Acid as Lubricant in Air and Vacuum - Guillaume Colas, institut FEMTO-ST, CNRS, Université Franche-Comté, France | |
| 19:30 - 23:30 | › Prediction of Numerical Running-In Profile Modification of Tapered Rollers Based on Neural Network - Yonggang Meng, State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, China | |
| 19:30 - 23:30 | › Steady-State Contact Temperature of Finite Bodies during Dry Sliding - Tomaž Požar, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia | |
| 19:30 - 23:30 | › Design and Shape Optimization of Valve Stem for Sealing Performance of Proportional Valve used in a Cold Gas Propulsion System - Fırat Mehmet Günkan, Dept. of Mechanical Engineering, Istanbul Technical University, Turkey | |
| 19:30 - 23:30 | › Acoustic Emission and Frictional Analysis of Granular Material Systems - Beikang Liu, Department of Mechanical Engineering, Imperial College London, United Kingdom | |
| 19:30 - 23:30 | › Degradation of Fluorinated Polymers/Lubricants due to Hyperthermal Nitrogen Collision in Very Low Earth Orbit - Masahito Tagawa, Kobe University, Japan | |
| 19:30 - 23:30 | › The Tribological Investigation of the Thin Film Electrode Arrays - Sercan Gökçeli, Dept. of Mechanical Engineering, Hacettepe University, Turkey | |
| 19:30 - 23:30 | › High-Temperature Fretting Behavior of Bi-Metallic (In718/L605) Superalloy Produced via Laser Powder Bed Fusion (L-PBF) Process - C.H. Sathisha, GE Aerospace Research |
Tuesday, September 3, 2024
| Time | Event | (+) |
| 08:30 - 09:00 | Potentials and challenges in using AI for understanding and predicting sliding wear mechanisms (Room 1 - Saint Maur) - Stefanie Hanke, Professor, University of Duisburg-Essen, Germany |
|
| 08:30 - 09:00 | Tribocorrosion approach to wear of implants (Room 2 - Essarts) - Anna Igual Muñoz, Senior Scientist, Tribology and Interfacial Chemistry Group, EPFL, Switzerland |
|
| 08:30 - 09:00 | Rolling bearing lubrication with oil/refrigerant mixtures: a review with contributions (Room 3 - Amphitheater) - Guillermo Morales-Espejel |
|
| 09:00 - 09:10 | Short break (switch sessions) | |
| 09:10 - 10:30 | Machine Learning - 2 (Room 1 - Saint Maur) | (+) |
| 09:10 - 09:30 | › Machine-Learning-Based Investigation of the Physical Source Mechanisms of Friction Brake Emissions - Quentin Caradec, Univ. Lille, CNRS, Centrale Lille, UMR 9013 - LaMcube, France | |
| 09:30 - 09:50 | › Prediction of Chatter in Twin Disc Tribometers with Mode Decomposition Techniques - Surya Kannan Peesapati, AC2T Research GmbH, Austria | |
| 09:50 - 10:10 | › A Machine Learning Strategy to Predict Dry Friction from Third Body Morphology - Alizée Bouchot, LaMCoS, INSA Lyon, France | |
| 10:10 - 10:30 | › Data Reduction Techniques for Optimised Machine Learning Modelling of TEHL Contacts in Journal Bearings - Samuel Cartwright, Mechanical and Aerospace Systems, University of Nottingham, United Kingdom | |
| 09:10 - 10:30 | 3rd Bodies - 2 (Room 2 - Essarts) | (+) |
| 09:10 - 09:30 | › PolyTetraFluoroEthylene Lubrication in Highly Loaded Rolling Contacts – Influence of Operational Conditions - Georgios Vokolos, Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Germany | |
| 09:30 - 09:50 | › Surface Modification of Polytetrafluoroethylene (PTFE) Fibers through Methyl Methacrylate (MMA) Polymerization for Self-Lubricating Composites - Xuhui Sun, State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, China | |
| 09:50 - 10:10 | › Nanol Additive as Antiwear and Friction Modifier - Isabella Gair, FEPS, University of Southampton, United Kingdom | |
| 10:10 - 10:30 | › Study of Tribofilm Formation in a Sliding Electrical Contact: Correlation with Wear and Electrical Performance - Timothée Doutriaux, LTDS UMR CNRS 5513, Ecole Centrale de Lyon & Everaxis Industries, France | |
| 09:10 - 10:30 | EHL - 1 (Room 3 - Amphitheater) | (+) |
| 09:10 - 09:30 | › A Fast Calculation Approach for Finite-Line Thermal EHL Contacts: Motivating Bearing Simulation Techniques - Di Yang, Beijing Jiaotong University, China | |
| 09:30 - 09:50 | › Applicability of Winkler and FEM Models For ElastoHydroDynamic Analysis of Deformable Oil and Water-Lubricated Journal Bearings - Ioannis Pervelis, National Technical University of Athens, Greece | |
| 09:50 - 10:10 | › Loss of Lubrication in an EHL Contact: a Numerical Approach - Maxence Decote, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] | |
| 10:10 - 10:30 | › Novel Engineering Approach to determine the Electrical Capacitance of Machine Elements with Line Contacts - Volker Schneider, Institute of Machine Design and Tribology (IMKT), Leibniz University Hannover, Germany | |
| 09:10 - 10:30 | Rolling Contact Fatigue - 1 (Room 4 - Le Chateau) | (+) |
| 09:10 - 09:30 | › Modelling of surface crack propagation under lubricated rolling sliding contact - Liang Guo, SKF Research & Technology Development, The Netherlands | |
| 09:30 - 09:50 | › The Effect of Hydrogen Concentration on Surface-Initiated Damage in Rolling Contacts - Lisa-Marie Weniger, Luleå University of Technology, Division of Machine Elements, Sweden | |
| 09:50 - 10:10 | › Lubrication Effect on Laboratory Scale Wheel-Rail Contact - Thibault Lesage, IRT Railenium, France | |
| 10:10 - 10:30 | › Stress Intensity Factors Analysis for a C-Crack in a Ceramic Roller Subjected to Representative Bearing Service Loads - David Degbe, DMAS, ONERA & Université Paris Saclay, Centre des Matériaux, France | |
| 10:30 - 11:00 | Coffee break (Poster and Exhibition room) | |
| 11:00 - 12:20 | Mixed Lubrication - 1 (Room 1 - Saint Maur) | (+) |
| 11:00 - 11:20 | › Self-Lubricating Composites: Effects of Sizing and Mixed Lubrication on Tribological Performance - Jose Daniel de Mello, Universidade Federal de Uberlândia - UFU & Universidade Federal de Santa Catarina = Federal University of Santa Catarina, Brazil | |
| 11:20 - 11:40 | › Tribofilm Formation Characteristics of ZDDP and DDP Additives and their Effect on Interfacial Friction - CANCELLED - Haichao Liu, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 11:40 - 12:00 | › Tribological Behavior of CuO@RGO Nanoparticles under Different Slide-Roll Ratio - Salete Alves, Universidade Federal do Rio Grande do Norte, Brazil | |
| 12:00 - 12:20 | › Influence of Small Electric Potentials on the Performance of Rolling-Sliding Lubricated Contacts - Ammad Yousuf, Imperial College London, United Kingdom | |
| 11:00 - 12:20 | Green Tribology - 2 (Room 2 - Essarts) | (+) |
| 11:00 - 11:20 | › Investigation of Using Microbubbles to Reduce Friction in Journal Bearing - Yuki Yoshimura, Tokai University, Dept of Mechanical Engineering, Japan | |
| 11:20 - 11:40 | › Tribological Performance of DLC Under Minimised Lubrication - Liuquan Yang, University of Leeds, United Kingdom | |
| 11:40 - 12:00 | › Experiments and Analysis of Loosening of Cone and Thread Fittings for High Pressure Hydrogen Systems - Joichi Sugimura, Kyushu University, Japan | |
| 12:00 - 12:20 | › Experimental Characterization of the Tribological and Acoustic Performance of Different Stern Tube Bearing Materials - Georgios N. Rossopoulos, National Technical University of Athens, Greece | |
| 11:00 - 12:20 | EHL - 2 (Room 3 - Amphitheater) | (+) |
| 11:00 - 11:20 | › The Infulence of Multiple Oil Tracks on Starved Elastohydrodynamic Lubrication - Yasuo Matsuzaki, NSK Ltd., Japan | |
| 11:20 - 11:40 | › Lubrication of a Truncated Circular EHL Contact - Tristan Patrigeon, LaMCoS, INSA Lyon, France | |
| 11:40 - 12:00 | › Heat Transfer during Hydrodynamic Lubrication in a Half-journal Bearing - Humberto Medina, Mechanical and Aerospace Systems, University of Nottingham, United Kingdom | |
| 12:00 - 12:20 | › A Novel Method for the Simultaneous Measurement of Grease Film Thickness and Cage Rotational Speed in Rolling Element Bearings - Fabio Tatzgern, AC2T Research GmbH, Austria | |
| 11:00 - 12:20 | Fretting (Room 4 - Le Chateau) | (+) |
| 11:00 - 11:20 | › The Study of Debris Formation in Fretting Wear of a High Strength Steel using Crossed-Cylinder Experiments - Allan Gichuki, MAS, Faculty of Engineering, University of Nottingham, United Kingdom | |
| 11:20 - 11:40 | › Towards Robust Calculations Axial Blade/Disk Attachments - Ben Kabondo Kashala, LaMCoS, INSA Lyon & Safran Aircraft Engines, France | |
| 11:40 - 12:00 | › Damping Behaviour of Different Metals under Fretting Conditions - Marion Kugler, Fraunhofer Institute for Mechanics of Materials & Institute for Applied Materials, Karlsruhe Institute of Technology, Germany | |
| 12:00 - 12:20 | › Tribological Behaviour of Fe-10Cr-4Al at Elevated Temperatures under Different Environmental Conditions - Daria Kolbas, Luleå University of Technology, Sweden | |
| 12:20 - 13:50 | Lunch (Restaurant) | |
| 13:50 - 15:30 | Mixed Lubrication - 2 (Room 1 - Saint Maur) | (+) |
| 13:50 - 14:10 | › On the Relation Between Friction and Multiscale Surface Roughness in Mixed Lubrication - Charlotte Spies, Robert Bosch GmbH & University of Freiburg, Germany | |
| 14:10 - 14:30 | › Influence of a Transmission Oil Degradation on System-level Behavior - Busra Duran, SKF, France | |
| 14:30 - 14:50 | › On the Electric Behavior of Conductive Grease inside the Contact Zone - CANCELLED - Liu Jinjie, Qingdao University of Technology, China | |
| 14:50 - 15:10 | › Alteration of Stribeck and Traction Curves of Lubricants due to Electrification - Leonardo Farfan Cabrera, Tecnológico de Monterrey = Monterrey Institute of Technology, Mexico | |
| 15:10 - 15:30 | › Self-Lubricating Fabric Composites Enhanced by the Microcapsules to Improve the Tribological Properties - Zhaozhu Zhang, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 13:50 - 15:30 | Lubricant Additives - 2 (Room 2 - Essarts) | (+) |
| 13:50 - 14:10 | › Carbon Dot-Based Ionic Liquids: a Novel Additive for Lubrication and Corrosion Inhibition Application - CANCELLED - Songwei Zhang, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 14:10 - 14:30 | › The Formation and Wear Resistance of Tribofilms Derived from Anti-Wear Additives using In-Situ AFM Observation - Yumi Hayashi, Sumitomo Heavy Industries, Ltd & Tokyo University of Science, Japan | |
| 14:30 - 14:50 | › The Effects of DC and AC Electrification on the Tribology of Gear Materials Lubricated by ICE and EV Targetted Additive Packages - Joshua Armitage, University of Leeds, United Kingdom | |
| 14:50 - 15:10 | › Evaluation of Ionic Liquids and Nanoparticles for Nanoscale Film Fabrication Harnessing Tribochemistry - Yuyang Yuan, University of Leeds, United Kingdom | |
| 15:10 - 15:30 | › Harnessing the Synergistic Potential of SiO2 and Cu Nanoparticles as Lubricant Additives for Enhanced Tribological Efficiency - Syed Junaid, Indian Institute of Technology Delhi, India | |
| 13:50 - 15:30 | Friction & Wear - 3 (Room 3 - Amphitheater) | (+) |
| 13:50 - 14:10 | › Wear of Directed Energy Deposited H13 Steel as a Function of its Graded Microstructure - Mohamed El Mansori, Arts et Metiers Institute of Technology, MSMP, HESAM Université, France | |
| 14:10 - 14:30 | › Wear Properties of Multi-Principal Element Alloys - Thon Thongklom, Department of Materials Science and Engineering, University of Sheffield, United Kingdom | |
| 14:30 - 14:50 | › Understanding the Corrosion and Wear at Nanoscale Interface - CANCELLED - Zhijiang (Justin) Ye, Miami University, United States | |
| 14:50 - 15:10 | › Analysis of Seizure Interface between Steel Crank Journal and Aluminum Alloy Plain Bearing - Takumi Iwata, Tokyo City University, Japan | |
| 15:10 - 15:30 | › Effect of Porosity on Surface Deformation and Subsurface Layer Produced by Scratch Tests of Sintered Low-Alloy Steel - Roberto Souza, University of São Paulo, Brazil | |
| 13:50 - 15:30 | Coatings - 1 (Room 4 - Le Chateau) | (+) |
| 13:50 - 14:10 | › Bridging Experiments and Computations to Advance Friction Reduction in Lubricant and Coating Synergy - Takeru Omiya, University of Coimbra, Portugal | |
| 14:10 - 14:30 | › Influence of Hydrogen-Containing Atmospheres on Friction and Wear of Diamond-like Carbon under Reciprocating Sliding - David Zeradjanin, Robert Bosch GmbH & Universität Siegen, Germany | |
| 14:30 - 14:50 | › Atomic-Scale Mechanisms of Superlubricity with Diamond-Like Carbon Coatings and Silicon-Based Ceramics - Gianpietro Moras, Fraunhofer IWM, MikroTribologie Centrum, Germany | |
| 14:50 - 15:10 | › Analysis of Tribologically Induced Changes in ta-C Coatings - Dominic Linsler, Fraunhofer Institute for Mechanics of Materials, Germany | |
| 15:10 - 15:30 | › Friction Reduction by the Combination of Xylitol Solution and DLC Coating - Masaya Fukuda, Tokyo City University, Japan | |
| 15:30 - 16:00 | Coffee break (Poster and Exhibition room) | |
| 16:00 - 17:00 | Mixed Lubrication - 3 (Room 1 - Saint Maur) | (+) |
| 16:00 - 16:20 | › Friction of Hybrid Ball Bearings Operating in Mixed Lubrication - Jeroen Wensing, SKF Research and Technology Development, The Netherlands | |
| 16:20 - 16:40 | › Interactions between Surface-Active Additives and Effects on the Wear Protection of Rolling Bearings - Merle Reimers, Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Germany | |
| 16:40 - 17:00 | › Predicting Friction in Total Hip Replacement Bearings: a Multiscale Approach - Robin Furze, University of Leeds, United Kingdom | |
| 16:00 - 17:00 | Lubricant Additives - 3 (Room 2 - Essarts) | (+) |
| 16:00 - 16:20 | › Triacetin as Lubricant Additives: Friction Measurement between Metal Pairs - Fida Majdoub, LabECAM, ECAM La Salle, Université de Lyon, France | |
| 16:20 - 16:40 | › The Effect of Esters on Wear and Tribofilm Formation in Electric Vehicle (EV) Lubricants - Johann Watson, University of Leeds, United Kingdom | |
| 16:40 - 17:00 | › Ammonia Fuel Engines: the Change of Tribological Behavior for the Cylinder Liner-Piston Ring - Zetong Wang, Harbin Engineering University, China | |
| 16:00 - 17:00 | EHL - 3 (Room 3 - Amphitheater) | (+) |
| 16:00 - 16:20 | › Lubrication of Rolling Bearing in the Starved Regime by Droplet on Demand - Norbert Bader, University of Twente, The Netherlands | |
| 16:20 - 16:40 | › Polymer Congestion and Shear Thinning in EHD Contact - Bastien Bolle, Department of Mechanical Engineering, Imperial College London, United Kingdom | |
| 16:40 - 17:00 | › Changes of Aqueous Solution of Polyethylene Glycol Film Thickness in EHD Contacts - Tomáš Poláček, Brno University of Technology, Czech Republic | |
| 16:00 - 17:00 | Coatings - 2 (Room 4 - Le Chateau) | (+) |
| 16:00 - 16:20 | › Investigation into the Asperity Persistence of the Rough Surface with a Hard Coating Layer - Keita Inose, Department of Mechanical Engineering, Imperial College London, United Kingdom | |
| 16:20 - 16:40 | › Tribofilm Formation Process from ZDDP on Manganese Phosphate Coatings with Different Surface Roughness of Underlying Steel - Saiko Aoki, Tokyo Institute of Technology, Japan | |
| 16:40 - 17:00 | › Tribological Aspects of Bolted Assemblies in Light Constructions - Wieslaw Grabon, Rzeszow University of Technology, Poland | |
| 17:00 - 17:10 | Short break (switch sessions) | |
| 17:10 - 18:10 | Mixed Lubrication - 4 (Room 1 - Saint Maur) | (+) |
| 17:10 - 17:30 | › High Friction of Rubber Caused by Negative Fluid Pressure under Glycerol Lubrication and its Underlying Mechanism - Arata Ishizako, Tohoku University, Japan | |
| 17:30 - 17:50 | › Development of a Repeatable, Accurate Chain Drives Dynamometer - Robert Wragge-Morley, University of Bristol, United Kingdom | |
| 17:50 - 18:10 | › Lubrication Dynamics Coupled Modeling of a Three-Dimensional PRCL System with Consideration of Piston Influence - Lining Gao, Shanghai Jiao Tong University, China | |
| 17:10 - 18:10 | Biotribology - 2 (Room 2 - Essarts) | (+) |
| 17:10 - 17:30 | › Friction Modulation of Catheters using Ultrasonic Waves - Mostafa A. Atalla, TU Delft, The Netherlands | |
| 17:30 - 17:50 | › MXene-Reinforced CoCrMo Composites for Biotribological Applications Fabricated by Additive Manufacturing - Sangharatna Ramteke, Pontificia Universidad Católica de Chile, Chile | |
| 17:50 - 18:10 | › Antibacterial Effect of Soft-Metal DLC Nanocomposite Coatings for Highly Durable Antibacterial Adhesive Tape - Minoru Goto, National Institute of Technology, Ube College, Japan | |
| 17:10 - 18:10 | Coatings - 3 (Room 4 - Le Chateau) | (+) |
| 17:10 - 17:30 | › Role of Probe Vertical Lift in Polymer Brush Friction and Wear - Hikaru Okubo, Yokohama National University, Japan | |
| 17:30 - 17:50 | › Effect of Traces of Ethanol Airborne Contamination on the Tribological Behaviour of SnO2 Coating - Guillaume Colas, Université de Franche-Comté, CNRS, institut FEMTO-ST, France | |
| 17:50 - 18:10 | › Multimodal Measurement of Polymer Brush Superlubric Interface - Daiki Kagiwata, Yokohama National University, Japan | |
| 17:10 - 18:10 | Space Lubrication - 3 (Room 3 - Amphitheater) | (+) |
| 17:10 - 17:30 | › Performance of the Antiwear Additives under Lubricant Immersion Condition in Vacuum - Takashi Yokoyama, Japan Aerospace Exploration Agency, Japan | |
| 17:30 - 17:50 | › Optimizing Labyrinth Seal Geometry to Minimize Liquid Lubricant Evaporation in Space Systems - Josef Pouzar, Brno University of Technology, Czech Republic | |
| 17:50 - 18:10 | › Frictional Torque Characteristics of PFPE Lubricated Ball Bearings under Oscillatory Motion in Vacuum - Kazuaki Maniwa, Japan Aerospace Exploration Agency, Japan | |
| 18:30 - 23:55 | Banquet at Paul BOCUSE (l'Abbaye de Collonges) |
Wednesday, September 4, 2024
| Time | Event | (+) |
| 08:30 - 10:10 | Gears - 1 (Room 1 - Saint Maur) | (+) |
| 08:30 - 08:50 | › Impact of the Surface Finish on Gear Tooth Friction - Matthieu Cordier, LaMCoS, INSA Lyon, France | |
| 08:50 - 09:10 | › Experimental and Simulation Analysis of oil-air Two-Phase Flow Characteristics in High-Speed Bearings - Chunhui Wei, LaMCoS, INSA Lyon, France & Beijing Institute of Technology, China | |
| 09:10 - 09:30 | › How Hybrid Thermal Model can Take up the Chalenges of using Temperature for Fault Detection in Geared Systems - Thomas Touret, ECAM LaSalle, LabECAM, France | |
| 09:30 - 09:50 | › Evaluating Lubrication Regimes of Spur Gear Meshing using Electrical Impedance Method - Asuka Watanabe, Yokohama National University, Japan | |
| 09:50 - 10:10 | › A New Formulation for Convective Heat Transfer in Oil Jet Lubricated Spur Gears - Thibaut Torres, ECAM LaSalle, LabECAM & INSA Lyon, LaMCoS, France | |
| 08:30 - 10:10 | Lubricant Additives - 4 (Room 2 - Essarts) | (+) |
| 08:30 - 08:50 | › Zinc DialkylDithioPhosphates Adsorption and Dissociation on Ferrous Substrates: an Ab Initio Study - Francesca Benini, Department of Physics and Astronomy, Alma Mater Studiorum—University of Bologna, Italy | |
| 08:50 - 09:10 | › Effects of Tribofilm derived from Sulfur/Phosphorus-based Additives on Pitting/Wear Resistance of Bearing Steel during Rolling Friction - Yunah Jeung, Tokyo University of Science, Japan | |
| 09:10 - 09:30 | › Tribological Performance of SEC-C6 CuDTP and Characterization of its Tribofilm - Noriko Ayame, Lubricants R&D Dept, ENEOS Corporation, Japan | |
| 09:30 - 09:50 | › Functionalized Graphene Quantum Dots from Residual Oil Fractions as Additives for Electric Vehicle Conductive Lubricants - Youssef Alashkar, King Abdullah University of Science and Technology, Saudi Arabia | |
| 09:50 - 10:10 | › Investigation of Tribochemical Reactivity of DLC Coatings by Combining Electronic Spectroscopies (XPS/AES/REELS) and Microscopy (FIB/TEM/EELS) - Aslihan Sayilan, LTDS, Ecole Centrale de Lyon, France | |
| 08:30 - 10:10 | Hydrodynamic Lubrication - 1 (Room 3 - Amphitheater) | (+) |
| 08:30 - 08:50 | › Investigation of the Affect of Oil Pocket Geometry on the Performance of Journal Bearings using a CFD-TEHL Model - Layton James, Mechanical and Aerospace Systems, University of Nottingham, United Kingdom | |
| 08:50 - 09:10 | › Effect of Surface Tension in Two-Phase Lubricated Contacts - Noël BRUNETIERE, Institut Pprime, France | |
| 09:10 - 09:30 | › Design and 3D CFD Analysis of Bio-Inspired Grooves and Pillars Micro-Structures for Enhanced Drag Reduction of Thin Films - Nikolaos Rogkas, Laboratory of Machine Design and Dynamics, National Technical University of Athens, Greece | |
| 09:30 - 09:50 | › On the Shape of Surface Texture - Xiaolei Wang, Nanjing University of Aeronautics and Astronautics, China | |
| 09:50 - 10:10 | › CFD Analysis of the Unsteady Compressible Flow in an Orifice Restrictor of a Gas Bearing - Mihai Arghir, Institut Pprime, France | |
| 08:30 - 10:10 | Coatings - 4 (Room 4 - Le Chateau) | (+) |
| 08:30 - 08:50 | › Frictional Anisotropy under Scratching Test for Molybdenum Thin Films Deposited by Glancing Angle Deposition (GLAD) - Guilherme Rodrigues, Institut FEMTO-ST, Université de Franche-Comté, France | |
| 08:50 - 09:10 | › Tribological Behavior of a Graphite-Phenolic Resin Solid Lubricant at High Loads - Omar Zouina, Karlsruhe Institute of Technology (KIT) & Institute for Applied Materials (IAM), MicroTribology Center μTC, Germany | |
| 09:10 - 09:30 | › Intelligent Lubricating Coatings Based on the Oblique Angle Deposition Technology - Shusheng Xu, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 09:30 - 09:50 | › Impact of Structural Defects on Nanotribological Behavior of Chemical Vapor Deposited WS2 Monolayers - Himanshu Rai, Czech Technical University in Prague, Czech Republic | |
| 09:50 - 10:10 | › Superlubricity – Role of Surface Texture and Graphene-Based Coatings under Colloidal Lubrication: Focus on Hypericin - Paul-marie Zubieta-Laborde, LTDS, Ecole Centrale de Lyon, France | |
| 10:10 - 10:40 | Coffee break (Poster and Exhibition room) | |
| 10:40 - 12:20 | Gears - 2 (Room 1 - Saint Maur) | (+) |
| 10:40 - 11:00 | › Modeling and Analysis of Relative Fatigue Life under 3D Mixed Lubrication in Marine Helical Gears - Renze Li, Harbin Engineering University, China | |
| 11:00 - 11:20 | › Method for Testing Surface Fatigue using Non-Circular Specimens with Instationary Sliding Conditions - Jaacob Vorgerd, Ruhr University Bochum = Ruhr-Universität Bochum, Germany | |
| 11:20 - 11:40 | › Effects of the Heat Treatment on Fatigue Wear of Gear Steel under Rolling/Sliding Contacts - Hayato Monzen, Tokyo University of Science, Japan | |
| 11:40 - 12:00 | › Investigation of Micropitting Occurence Following Crack Propagation under E-Axle Lubricant - Kaito Yoshioka, Tokyo University of Science, Japan | |
| 12:00 - 12:20 | › Effect of Roughness on Micropitting: a New Geometric Analysis - Abdellah Marzoug, Safran Transmission Systems & LaMCoS, INSA Lyon, France | |
| 10:40 - 12:20 | Surface Topography - 3 (Room 2 - Essarts) | (+) |
| 10:40 - 11:00 | › Experimental Investigation on The Effect of Roughness and Wettability on Tribological Properties of Metallic Surfaces Prepared by EDM - Dimitrios Skondras-Giousios, Laboratory of Manufacturing Technology, School of Mechanical Engineering, National Technical University of Athens, Greece | |
| 11:00 - 11:20 | › Patterned Surface Contact for Macro Scale Engineering Superlubricity - Aaron Sinnott, Trinity College Dublin, Ireland | |
| 11:20 - 11:40 | › Metainterfaces: How to Design Rough Contacts with Specified Friction Laws? - Julien Scheibert, LTDS, CNRS, Ecole Centrale de Lyon, France | |
| 11:40 - 12:00 | › Factors that Influence the Triboelectric Charging of Textured Plastic Slabs in Conformal Contact - Cosmina Chiujdea, Institut Pprime, France & University Politehnica of Bucharest, Romania | |
| 12:00 - 12:20 | › Exploring Tire/Rail Friction: Contaminated Cases - Bilel Jebali, Laboratoire Environnement, Aménagement, Sécurité et Eco-conception, Université Gustave Eiffel, France | |
| 10:40 - 12:20 | Physics of Friction (Room 3 - Amphitheater) | (+) |
| 10:40 - 11:00 | › Macroscopic Low-Friction via Twinning Assisted Lattice Reconstruction in Magnesium - Xiang Chen, Nanjing University of Science and Technology, China | |
| 11:00 - 11:20 | › Experimental Measurenent of Strain Distribution in Silicone Rubber Bulk during Friction against a Stainless-Steel Sphere - Toshiaki Nishi, Tohoku University, Japan | |
| 11:20 - 11:40 | › A New Mechanism of the Interfacial Water Film Dominating Low Ice Friction - CANCELLED - Weimin Liu, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 11:40 - 12:00 | › Stiffness and Damping of Rubber in Sliding Contact Determined by Resonance Curves - Shintaro Hatanaka, Yokohama National University, Japan | |
| 12:00 - 12:20 | › Modeling and Designing the Electrical Contact of Sliding Interfaces - Song Aisheng, State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, China | |
| 10:40 - 12:20 | Biotribology - 3 (Room 4 - Le Chateau) | (+) |
| 10:40 - 11:00 | › Hydrogels Prepared from Ovomucins: an Easy-to-Access Model for Mucus Tribology - Seunghwan Lee, University of Leeds, United Kingdom | |
| 11:00 - 11:20 | › Polymer Brushes for Biolubrication - CANCELLED - Bin Li, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China | |
| 11:20 - 11:40 | › Wear Characteristics of Ultra-High Molecular Weight Polyethylene on Production of Inflammatory Cytokine - Yoshitaka Nakanishi, Kumamoto University, Japan | |
| 11:40 - 12:00 | › Tribology in the Soft World: Compliant Boundaries and Complex Environment - Carlos Drummond, Centre de Recherche Paul Pascal, Université Bordeaux 1, France | |
| 12:00 - 12:20 | › Surface Modification of NanoMOFs with Microgels for Aqueous Lubrication and Drug Release - CANCELLED - Jianxi Liu, Northwestern Polytechnical University, Xián, China | |
| 12:20 - 13:50 | Lunch (Restaurant) | |
| 13:50 - 15:10 | Mixed Lubrication - 5 (Room 1 - Saint Maur) | (+) |
| 13:50 - 14:10 | › Tribological Investigation of Friction Behavior of Piston Ring-Cylinder Liner Under the Effect of Ammonia-dispersed Engine Oil - Emir Yilmaz, Sophia University, Tokyo, Japan | |
| 14:10 - 14:30 | › Revealing the Role of Structure and Boundary Conditions in Friction Reduction with Tribocolloid Lubricants - Abhishek Kumar Gupta, IoP, University of Amsterdam, The Netherlands | |
| 14:30 - 14:50 | › Measurement of Adsorption and Friction Properties of Additives by Vertical-Objective Type Ellipsometric Microscopy - Kenji Fukuzawa, Nagoya University, Japan | |
| 14:50 - 15:10 | › Friction Response of Laser Generated Stochastically Distributed and Ordered Textues for Rigid and Compliant Counterpart Contact - Paul Butler-Smith, Manufacturing Technology Centre, United Kingdom | |
| 13:50 - 15:10 | Hydrodynamic Lubrication - 2 (Room 2 - Essarts) | (+) |
| 13:50 - 14:10 | › Study of Cavitation Pressure on Textured Surface in Mechanical Seals - Masatoshi Itadani, Eagle Industry Co. Ltd., Japan | |
| 14:10 - 14:30 | › Influences of Local Temperatures on the Performance of Surface Structures - Norbert Bader, Delft University of Technology, The Netherlands | |
| 14:30 - 14:50 | › Study on Cavitation Occurrence in High-Speed Hybrid Water-Lubricated Thrust Bearings - Yuki Minagawa, Tokyo University of Science, Japan | |
| 14:50 - 15:10 | › Improvement in Measurement Accuracy of Oil Film Distributions on Piston Skirt using Sapphire Glass Cylinder - Yasuhiro Ishikawa, Tokyo City University, Graduate School of Integrative Science and Engineering, Japan | |
| 13:50 - 15:10 | Rolling Contact Fatigue - 2 (Room 3 - Amphitheater) | (+) |
| 13:50 - 14:10 | › Surface-Initiated Rolling Contact Fatigue on a Dent: Microstructural Evolution and Effects on the Failure Mechanism - Aurore Goigoux, NTN Europe & LaMCoS, MATEIS, INSA Lyon, France | |
| 14:10 - 14:30 | › Using Ultrasound to Measure the Inlet Meniscus Position and Starvation Ratio of a Rolling Element Bearing Contact - Will Gray, University of Sheffield, United Kingdom | |
| 14:30 - 14:50 | › Tribological Properties and Performance of a Novel Aeroengine Bearing Steel Arctic15 - Jean-Baptiste Coudert, SKF Aerospace, France | |
| 14:50 - 15:10 | › The Effect of Electrical Current on Tribological Contact - Grigore Cernalevschi, Faculty of Engineering and Physical Sciences, University of Southampton, United Kingdom | |
| 15:10 - 16:10 | Friction & Wear - 4 (Room 1 - Saint Maur) | (+) |
| 15:10 - 15:30 | › Vat Photopolymerization 3D Printing of Self-Lubricating Polymer Composites - Xiaolong Wang, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences & Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, China | |
| 15:30 - 15:50 | › Wear Study of Tire Tread Materials under Low-Severity Wear Conditions - Cloé Chanal, IMP, CNRS, INSA Lyon & LTDS, CNRS, Ecole Centrale de Lyon, France | |
| 15:50 - 16:10 | › Contact and Friction Behavior on Soft-Hard Contact Interface under Mechanical Stress Conditions - Shuyan Yang, Qingdao Tribology Group, State Key Laboratory of Solid Lubrication, China | |
| 15:10 - 16:10 | Friction & Wear - 5 (Room 2 - Essarts) | (+) |
| 15:10 - 15:30 | › Solid Particle Erosion of Aluminium Alloy of Aircraft Fuselage Skin - Ezequiel Gallardo-Hernández, Instituto Politecnico Nacional, Mexico | |
| 15:30 - 15:50 | › Investigating the Influence of Flake-Shaped Particles on the Frictional Behavior of Materials - Parissa Alavi, LSMS, EPFL, Switzerland | |
| 16:00 - 16:10 | › Evolution of the Seismic Fault – Asperity System through the Lens of Pin-On-Disk Experiments - Adriane CLERC, LaMCoS, INSA Lyon, France | |
| 15:10 - 16:10 | Thermal Effects (Room 3 - Amphitheater) | (+) |
| 15:10 - 15:30 | › Effect of Tribotesting Scale on the Understanding of High Temperature Tribology of Tool Materials - Gabriel Macêdo, Luleå University of Technology, Sweden | |
| 15:30 - 15:50 | › Enhanced Lubrication Performance of PFPE with TMFS-Modified MoS2 under High-Temperature Conditions - Yunze Li, Tsinghua University, China | |
| 15:50 - 16:10 | › Friction and Wear of AAR Class D Wheel Steel Sliding against High-Strength Rail Steel at Temperatures up to 700 °C - Nathan Stray, Universidade Federal do Espirito Santo, Brazil | |
| 16:10 - 16:20 | Short break (switch sessions) | |
| 16:20 - 16:50 | Award and Closure session (Room 3 - Amphitheater) |
