08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
15:00 - 20:00 (5h)
On-site registration opening
20:00 - 22:00 (2h)
Young tribologists event
8:00 - 9:00 (1h)
Registration - Main hall
9:00 - 9:10 (10min)
Opening and Welcome address
Plenary room - Saint Maur & Essart
9:10 - 10:00 (50min)
Tribological challenges for European space exploration: A journey summary from past to actual and future solutions
Plenary room - Saint Maur & Essart
Lionel Gaillard (ESA, The Netherlands)
10:00 - 10:50 (50min)
How an earthquake is born? A laboratory perspective on the stability of frictional sliding
Plenary room - Saint Maur & Essart
Marco Scuderi (University La Sapienza, Roma, Italy)
https://leeds-lyon2024.sciencesconf.org/data/program/LL24_Scuderi.pdf 10:50 - 11:20 (30min)
Coffee break
Poster and Exhibition room
11:20 - 12:20 (1h)
Space Lubrication - 1
Plenary room - Saint Maur & Essart
› Application of PEEK Composite to Sliding Mechanisms in Space
- Koji Matsumoto, Japan Aerospace Exploration Agency, Japan
11:20-11:40 (20min)
› The Development of Passivated MoS2 Coatings for Space Applications
- Liuquan Yang, University of Leeds, United Kingdom
11:40-12:00 (20min)
› Low Wear Capabilities of Ni-Based Bulk Metallic Glass under Rolling/Sliding Unlubricated Conditions in Air and Vacuum
- Guillaume Colas, Université de Franche-Comté, CNRS, institut FEMTO-ST, France
12:00-12:20 (20min)
11:20 - 12:20 (1h)
3rd Bodies - 1
Room 3 - Amphitheater
› A Pin-On-Disc Study of Particles Emitted During the Tire Rubber and Road Aggregates Wear Test
- Stepan Bobrovnikov, Laboratoire Environnement, Aménagement, Sécurité et Eco-conception, France
11:20-11:40 (20min)
› Effect of Microstructural Changes on Tribological Mechanisms in Automotive Friction Braking Conditions
- Mathis Briatte, Laboratoire de Mécanique, Multiphysique, Multiéchelle - UMR 9013, France
11:40-12:00 (20min)
› A Granular Model of Stick-Slip in Laboratory Earthquakes
- Guilhem Mollon, Laboratoire de Mécanique des Contacts et des Structures, INSA Lyon, France
12:00-12:20 (20min)
11:20 - 12:20 (1h)
Machine Learning - 1
Room 4 - Le Chateau
› Machine Learning Interaction Potentials for Tribochemistry: an Application to Alkyl Thiolate at Sliding Copper Interfaces
- Paolo Restuccia, Dipartimento di Fisica e Astronomia - Department of Physics and Astronomy, Università di Bologna, Italy
11:20-11:40 (20min)
› Ab Initio Informed Machine Learning Potential for Tribochemistry and Mechanochemistry: Application for Lubricant Additives
- Paolo Restuccia, Dipartimento di Fisica e Astronomia - Department of Physics and Astronomy, Università di Bologna, Italy
12:00-12:20 (20min)
12:20 - 12:30 (10min)
Group Picture
12:30 - 13:50 (1h20)
Lunch
Restaurant
13:50 - 15:30 (1h40)
Friction & Wear - 1
Room 1 - Saint Maur
› Synergistic Effects of PTFE and Nano-Al2O3 Fillers on Self-Lubricity of POM Polymer-Matrix Nanocomposite
- NO SHOW - Ibrohim Rustamov, Loctek Ergonomic Technology Corp. & Faculty of Mechanical Engineering and Mechanics, Ningbo University
13:50-14:10 (20min)
› Solid Lubrication of Nanocomposite Ceramic Si3N4-Si3N4 and Hybrid Si3N4-Steel Contacts
- Kostyantyn Grinkevych, Eduardo Torroja Institute of Construction Sciences, CSIC (IETCC-CSIC), Spain, and I.M. Frantsevich Institute for Problems of Materials Science, NAN Ukraine
14:10-14:30 (20min)
› Tribological Behavior of Polymer/Metal Friction Pairs in the Simulated Deep Sea
- Hao Liu, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
14:30-14:50 (20min)
› Surface Modification and Solid Lubricant Compounding of High-Strength Brass Alloy by Friction Stir Processing
- Masaya Hirukawa, Tokyo University of Science, Japan
14:50-15:10 (20min)
› Evolution of surface roughness in some tribological contacts
- Krzysztof Kubiak, University of Leeds, United Kingdom
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Lubricant Additives - 1
Room 2 - Essarts
› Insight into the Fundamental Behaviour of Organic Friction Modifiers through Synchrotron X-Ray Experiments
- Inga Kicior, European Synchrotron Radiation Facility, France & University of Leeds, United Kingdom
13:50-14:10 (20min)
› Tribological Performance Evaluation of Ti3C2Tx MXene as Lubricant Additive in Presence of Organic Friction Modifier
- Afrina Khan Piya, University of Leeds, United Kingdom
14:10-14:30 (20min)
› Tribofilm Printing of ZDDP and APTES Using Sliding Contacts
- Alaaeddin Al Sheikh Omar, University of Leeds, United Kingdom
14:30-14:50 (20min)
› Structure of Organic Friction Modifiers Tribofilm in Reciprocating Conditions
- Marjan Homayoonfard, University of Leeds, United Kingdom
14:50-15:10 (20min)
› Tribological Evaluation of Micro-Algae Oils as Green and Sustainable Additives for Low-Viscosity Lubricants
- Carlos C. Rubio-Hernández, Tecnológico de Monterrey = Monterrey Institute of Technology, Mexico
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Green Tribology - 1
Room 3 - Amphitheater
› Water-based Lubricants with Graphene Oxide Additives for Enhanced Friction and Wear Performance
- CANCELLED - Mohammad Reza Najjari Saadatabadi, Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, United Kingdom
13:50-14:10 (20min)
› Tribology of Emerging Water Based Lubricants and Low Viscosity Oils E-Fluids Technologies in Rolling/Sliding Contacts
- Christine Matta, SKF B.V., Research and Technology Development Center, Houten, The Netherlands
14:10-14:30 (20min)
› Effects of Tannic Acid Induced Complex Films on Tribological Properties between Rail and Wheel in Railways
- Kazuki Ikoma, Railway Technical Research Institute, Japan
14:30-14:50 (20min)
› Triboemission of Nanoparticle Aerosols
- Roman Nevshupa, Eduardo Torroja Institute of Construction Sciences, CSIC (IETCC-CSIC), Spain
14:50-15:10 (20min)
› Nanostructured Biogrease Performance to Wheel/Rail Contact Application
- Salete Alves, Universidade Federal do Rio Grande do Norte, Brazil
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Modelling - 1
Room 4 - Le Chateau
› Atomic-Scale Modelling of Lubricants at High Pressure: on the Competition of Shear Thinning, Thermal Thinning and Wall Slip
- Michael Moseler, Fraunhofer IWM, MikroTribologie Centrum, Germany
13:50-14:10 (20min)
› Prevention of Cage Wear in Cylindrical Roller Bearings by Reducing Roller Mass
- Daisuke Suzuki, Railway Technical Research Institute, Japan
14:10-14:30 (20min)
› Comparison of a Viscoelastic and a Couple Stress Model in a Simple Slider Bearing
- John Tichy, Rensselaer Polytechnic Institute, United States
14:30-14:50 (20min)
› Lubricant Transport in Piston Cylinder Assemblies
- Polychronis Dellis, National Technical University of Athens, School of Mechanical Engineering, Greece
14:50-15:10 (20min)
› Empirical Compensation of Parasitic Bearing Friction in Chain Drive Dynamometers
- George C. Barnaby, University of Bristol, United Kingdom
15:10-15:30 (20min)
15:30 - 16:00 (30min)
Coffee break
Poster and Exhibition room
16:00 - 17:00 (1h)
Space Lubrication - 2
Room 1 - Saint Maur
› Novel MoSx and a-C/MoSx hybrid coatings by vacuum arc deposition for use in dry air and high vacuum
- Volker Weihnacht, Fraunhofer Institute for Material and Beam Technology, Germany
16:00-16:20 (20min)
› MoS2 Lubricating Film Meets Supramolecular Gel: a Novel Composite Lubricating System for Space Applications
- Meirong Cai, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
16:20-16:40 (20min)
› Tribological Behavior of Environmentally-Friendly MoS2-Based Solid Lubricants at Cold Temperature
- Parastoo Fallah, Concordia University, Montreal, Canada
16:40-17:00 (20min)
16:00 - 17:00 (1h)
Surface Topography - 1
Room 2 - Essarts
› On Wear Behavior of Mn-Modified Al-Cu-Mg-Si-Ti Alloy Fabricated by Laser Powder-Bed Fusion
- Nan Kang, Arts et Métiers Institute of Technology, MSMP, HESAM Université, France
16:00-16:20 (20min)
› The Reciprocating Sliding Friction Behavior and Wear State Transition Mechanism of Cylinder Liner and Piston Ring
- Xuan Ma, Harbin Engineering University, China
16:20-16:40 (20min)
› Analysis of Multimodal Experimental Data for Physical Understanding of Emissions Mechanisms during Braking Events
- Philippe Dufrénoy, Univ. Lille, CNRS, Centrale Lille, UMR 9013 - LaMcube, France
16:40-17:00 (20min)
16:00 - 17:00 (1h)
Biotribology - 1
Room 3 - Amphitheater
› Frequency Modulation Effect of Fingerprints Mediates the Sensitive Perception
- Linfeng Wang, Nanjing University of Aeronautics and Astronautics, China
16:00-16:20 (20min)
› Misleading Tactile Perception by Vibrotactile Rendering
- Livia Felicetti, Sapienza - University of Rome, Italy & LaMCoS, INSA Lyon, France
16:20-16:40 (20min)
› Multimodal Tactile Sensor Aiming at Smart Space Extravehicular Multi-Finger Operations based on Finger Tribology
- Kaixuan Kong, Nanjing University of Aeronautics and Astronautics, China
16:40-17:00 (20min)
16:00 - 17:00 (1h)
Modelling - 2
Room 4 - Le Chateau
› The Tire-Road Contact: a Mechanical Mixing Seen as a Shear-Induced Diffusive Process
- Kévin Daigne, LaMCoS, INSA Lyon, France
16:00-16:20 (20min)
› Friction and Wear Mechanisms of PTFE by Atomistic Simulations: Transfer Film Formation and the Synergy Between PTFE and PEEK
- Stefan Peeters, Fraunhofer Institute for Mechanics of Materials, Germany
16:20-16:40 (20min)
› The Role of Grain Fragmentation in Understanding Shear Localization via DEM Simulation
- Nathalie Casas, Dipartimento di Scienze della Terra, La Sapienza Università di Roma, Italy
16:40-17:00 (20min)
17:00 - 17:10 (10min)
Short break (switch sessions)
17:10 - 18:10 (1h)
Friction & Wear - 2
Room 1 - Saint Maur
› A State-of-the-Art Tribometer for Real Conditions with Superheated Water (Real Conditions In Nuclear Environment)
- Bogdan Munteanu, IREIS, France
17:10-17:30 (20min)
› The Effect of Lubricant Contamination with Water on Friction Modifiers Tribofilm Properties
- Ajay Pratap Singh Lodhi, University of Leeds, United Kingdom
17:30-17:50 (20min)
› Investigation of Environmentally Acceptable Base Oil/Additive Combinations with Regard to their Functional Requirements
- Marius Bürger, Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Germany
17:50-18:10 (20min)
17:10 - 18:10 (1h)
Surface Topography - 2
Room 2 - Essarts
› Influence of Jets at Subzero Temperatures on the Behavior of Erosive Wear and Ductility on AISI 310 Stainless Steel
- César Sedano, Universidad de Guadalajara, Mexico
17:10-17:30 (20min)
› Influence of Interstitial Oxygen and Nitrogen on the Tribological Behaviour of Titanium and Ti6Al4V
- Amod Kashyap, Institute for Applied Materials, Karlsruhe Institute of Technology, Germany
17:30-17:50 (20min)
› Interfacial Thermal Conductance across Solid/Liquid Interface
- Andrea Zovko, Department of Mechanical Engineering, Imperial College London, United Kingdom
17:50-18:10 (20min)
17:10 - 18:10 (1h)
Nanotribology
Room 3 - Amphitheater
› Insights into the Nanoscale Tribological Properties of Graphite in Water
- Jitendra Soni, Indian Institute of Technology Delhi, India
17:10-17:30 (20min)
› Effect of Graphene Reinforcement on the Tribological and Fracture Behaviours of Silicon-Based Nanocomposites
- Hussein Abo El-Einein, LTDS UMR CNRS 5513, Ecole Centrale de Lyon, France
17:30-17:50 (20min)
› Role of Crystallographic Orientation and Temperature on Tribological Characteristics of CoCrNi Medium Entropy Alloy
- Vamsi Majeti, Indian Institute of Technology Delhi, India
17:50-18:10 (20min)
17:10 - 18:10 (1h)
Modelling - 3
Room 4 - Le Chateau
› A BEM-Based Model for Wear in the Contact of Textile Fibres
- Josh Montgomery, University of Leeds, United Kingdom
17:10-17:30 (20min)
› Mechanism of Frictional Contact Induced Vibration of TBM Cutterhead-Cutter System
- Mengqi Zhang, Southwest Jiaotong University, China
17:30-17:50 (20min)
› Instabilities in Sliding Systems Induced by Solid Viscoelasticity
- Toshiki Watanabe, Yokohama National University, Japan
17:50-18:10 (20min)
18:30 - 19:30 (1h)
Special talk: Tribology and Wine: What’s the Connection?
Room 3 - Amphitheater
N. Spencer
19:30 - 23:30 (4h)
Buffet during poster session
Poster and Exhibition room
19:30 - 23:30 (4h)
Poster - Lubricated Contacts
Poster and Exhibition room
› Effect of Kinetics of MoS2 Sheets Formation and Organization on Tribological Behavior of Lubricated Contacts using MoDTC Additive
- Mathilde Verduno, LTDS, CNRS, Ecole Centrale de Lyon, France
19:30-23:30 (4h)
› Influence of a Transmission Oil Degradation on System-level Behavior
- Busra Duran, SKF France
19:30-23:30 (4h)
› Lubrication Condition Monitoring in EHD Line Contacts using the Electrical Impedance Method
- Taisuke Maruyama, NSK Ltd., Japan
19:30-23:30 (4h)
› Effect of Chain Length on Tribological Performances of MXene Solvent-Free Nanofluids as Additives for Water-Based Lubricants
- Zhangpeng Li, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
19:30-23:30 (4h)
› Neutron Reflection Characterisation of Ionic Liquid Additive Adsorption at Steel/Water Interface for Water-Based Lubrication
- Xuzhi Hu, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China & University of Manchester, United Kingdom
19:30-23:30 (4h)
› A Reynolds-type Equation for Bearings with Stochastic Roughness under Elastohydrodynamic Lubrication
- Dimitrios Skaltsas, National Technical University of Athens, Greece
19:30-23:30 (4h)
› Experimental Investigations on Spin Power Losses Generated in a Planetary Gear Set
- Marie Winger, LabECAM, ECAM LaSalle & LaMCoS, INSA Lyon & Safran Transmission Systems, France
19:30-23:30 (4h)
› A Study on Hydrogen Concentration in the Crank Case of a Hydrogen Internal Combustion Engine
- Daisuke Hiyama, Tokyo City University, Japan
19:30-23:30 (4h)
› Advanced Electro-Tribological and Electro-Rheological Testing of Grease Lubricated Ball Bearings – from Impedance to Break Down Voltage
- Paul Staudinger, Anton Paar GmbH, Austria
19:30-23:30 (4h)
› Viscosity Measurement In-Situ at High Pressure using Ultrasound
- Gladys Peretti, The Leonardo Centre for Tribology, The University of Sheffield, United Kingdom
19:30-23:30 (4h)
› Application of Dielectric Spectroscopy for EHD Contact
- Shunsuke Iwase, NSK Ltd. & Nagoya Institute of Technology, Japan
19:30-23:30 (4h)
› Evaluating Slip Effects in ElastoHydroDynamic Lubrication: Insights from Navier-Stokes Equations
- Rayan Ajeeb, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
19:30-23:30 (4h)
› Hybrids of Ionic Liquids and Cu-Decorated Carbon Nanotubes as Potential Superlubricants for Steel-Polymers Friction Pairs
- Lukasz Wojciechowski, Poznan University of Technology, Poland
19:30-23:30 (4h)
› The Effect of Contaminants in Used Mining Gear Oils on the Wear of Machine Elements with Thin Antiwear Coatings
- Marek Kalbarczyk, Łukasiewicz Research Network - Institute for Sustainable Technologies, Poland
19:30-23:30 (4h)
19:30 - 23:30 (4h)
Poster - Wear and Damage
Poster and Exhibition room
› Reciprocating Sliding Wear Behavior on Aluminum and Bronze Alloys under Dry and Lubricated Conditions
- Manuel Vite-Torres, Instituto Politécnico Nacional ESIME U Zacatenco, Mexico
19:30-23:30 (4h)
› Evaluation of Friction and Wear of Enamel During the Loss and Recovery of Minerals Exposed to Demineralizing Liquids
- Sara Topete, Universidad de Guadalajara, Mexico
19:30-23:30 (4h)
› Analysis of Wear Mechanisms, Microstructure Modifications of Thrust Ball Bearing under Fretting Contact and Grease Lubrication
- Roderick Jacques, Cetim, Laboratoire Tribologie, Pôle Matériaux Métalliques et Surface, France.
19:30-23:30 (4h)
› Effect of Temperature and Load on the Behavior of Adhesive Wear on the Tire-Concrete Pavement Interaction
- Elizabeth Sedano, Universidad de Guadalajara, Mexico
19:30-23:30 (4h)
› Sliding Wear Prediction in Wheel-Rail System under Aqueous Condition
- João Vitor Silva e Silva, Federal University of Espírito Santo, Brazil
19:30-23:30 (4h)
› Interaction between Adhesive Wear and Noise on Tire-Concrete Pavement Contact at Different Speeds
- Fernando Galvez, Universidad de Guadalajara, Mexico
19:30-23:30 (4h)
› Study of Erosion Wear by Solid Particle on a Carbon Steel Pipeline Section (API 5L-X52)
- Javier Frias-Flores, Instituto politecnico national, Mexico
19:30-23:30 (4h)
› The Effect of Usage and Pad Material on the Tribological Circuit and Wear Dynamics in Friction Braking
- Joseph Frangieh, LaMCube, Centrale Lille, France
19:30-23:30 (4h)
› Rolling Contact Fatigue Behaviour of Nitroalloy Steel (Cronidur 30) under Varied Slip Conditions
- Kesavan Dhanasekaran, Indian Institute of Technology Palakkad, India
19:30-23:30 (4h)
› Research on the Friction and Wear Testing Machine for Simulated Ocean Environment
- Hongfei Shang, Tsinghua University, China
19:30-23:30 (4h)
› Effects of Temperature and Load on Sliding Wear between Wheel and Rail Steels
- Nathan Strey, Federal University of Espirito Santo, Brazil
19:30-23:30 (4h)
› Influence of the Sintering Process on the Slurry Erosion Behavior of New Fe-SiC Cermets.
- Nicolás Araya, Universidad de Concepción - University of Concepcion, Chile
19:30-23:30 (4h)
› Influence of Water, Relative Humidity and Nitrogen Environment on Friction and Wear Performance of CuO/MoS2 Hybrid Nanoparticles in Reciprocating Sliding Contacts
- Raaid Yassin, Institute of Functional Surfaces, University of Leeds, United Kingdom & North Refineries Company, Ministry of Oil, Iraq
19:30-23:30 (4h)
› Influence of Slide-Roll Ratio on Micropitting / Macropitting under High Load and High Speed Rolling Friction Test
- Takuto Kunii, Tokyo University of Science & Rtec-Instruments K.K., Japan
19:30-23:30 (4h)
› Ultrasonic Monitoring of Long Term Cycling and Degradation of Lithium-Ion Batteries
- Daniel Williams, University of Sheffield, United Kingdom
19:30-23:30 (4h)
› Investigations around Thermal and Tribological Contributions on Carbon/Carbon Composite's Wear
- Hugo Bergère, LaMCoS, INSA Lyon, France
19:30-23:30 (4h)
› Friction and Wear Behavior of Co-based Alloys under Harsh Conditions
- Patrick Beau, Beau Engineering Services & Optimol Instruments Prüftechnik GmbH, Germany
19:30-23:30 (4h)
› Evolution of Stress/Strain State and Contact Area of Worn Elastomers during Shearing
- Antoine Mille, LTDS, CNRS, Ecole Centrale de Lyon, France
19:30-23:30 (4h)
19:30 - 23:30 (4h)
Poster - Surface and Friction Science
Poster and Exhibition room
› Additive Manufacturing of Intelligent and Self-Lubricating Polyimide Surfaces
- Yuxiong Guo, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences & Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, China
19:30-23:30 (4h)
› Excitation and Attenuation of Surface Waves in Disordered Materials
- Ibrahim Ghanem, Department of Microsystems Engineering, University of Freiburg, Germany
19:30-23:30 (4h)
› Dry Friction of Amorphous Carbon on Epitaxial Graphene: Insights and Observations
- Mohammad Zarshenas, Fraunhofer Institute for Mechanics of Materials, Institute of Physics, University of Freiburg, Germany
19:30-23:30 (4h)
› Wettability of Complex Fractal Surfaces - Multiscale Correlation
- Katarzyna Peta, Poznan University of Technology, Poland
19:30-23:30 (4h)
› Nonconventional Tribochemical Activation: Facing the Challenges in Non-Tribological Applications
- Roman Nevshupa, Institute of Construction Science Eduardo Torroja, CSIC, Spain
19:30-23:30 (4h)
› Frictional Behavior of Paper Wiper in Partially Wet Conditions: Significance of Three Dimensional Wetting
- Shoma Kobayashi, Tohoku University, Japan
19:30-23:30 (4h)
› Effect of Water Absorption on the Friction Characteristics of Coir Fibers
- Sumanta Prasad Dewri, Indian Institute of Technology Madras, India
19:30-23:30 (4h)
› Multi-Phase and Multi-Scale Wear Model using Phonon, Quantum Chemical Molecular Dynamics and Machine Learning
- Chao Zhang, Shanghai University, China
19:30-23:30 (4h)
› Construction of Solid-Liquid Coupling Interfaces for Ultralow Friction and Stable Drag Reduction
- Wufang Yang, State Key Laboratory of Solid Lubrication, Chinese Academy of Sciences, China
19:30-23:30 (4h)
› Research on Friction Control by Pillar-Shaped Texturation under Lubricated Conditions
- Takumi Matsuura, Tokyo University of Science, Japan
19:30-23:30 (4h)
19:30 - 23:30 (4h)
Poster - Dry Contacts and Coatings
Poster and Exhibition room
› Tribological and Anticorrosive Performances of Graphene Coatings on Stainless Steel Substrates Constructed by Metal Ion-Induced Self-Assembly
- Jinqing Wang, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
19:30-23:30 (4h)
› Boundary Element Method for Periodic Phenomena, Application to the Modelling of Tire-Pavement Contact.
- Nicolas Durand, LaMCoS, CNRS, INSA Lyon, France
19:30-23:30 (4h)
› Friction Behaviors of Tungsten Disulfide at Elevated Temperatures
- Keizo Hashimoto, Teikyo University, Japan
19:30-23:30 (4h)
› Investigation on Asymmetric Hysteresis Friction Behavior between Wood and a Spherical Steel Pin
- Yi Zheng, Delft University of Technology, The Netherlands
19:30-23:30 (4h)
› Enhancing the Tribological Properties of Ti6Al4V Alloy through Duplex Plasma Nitriding and MoS2 Coating
- Kai Le, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
19:30-23:30 (4h)
› Additive Manufacturing as a Potential Method to Produce Friction Surfaces of Joint Implants: the Tribological Behaviour of Ti6Al4V
- Lukáš Odehnal, Department of Tribology, Faculty of Mechanical Engineering, Brno University of Technology, Czech Republic
19:30-23:30 (4h)
› Friction Coefficient of Cardboard Packing Samples
- Brenda Acevedo-Sanchez, Instituto Politecnico National, Mexico
19:30-23:30 (4h)
› Sprayed Alkylphosphonic Acid as Lubricant in Air and Vacuum
- Guillaume Colas, institut FEMTO-ST, CNRS, Université Franche-Comté, France
19:30-23:30 (4h)
› Prediction of Numerical Running-In Profile Modification of Tapered Rollers Based on Neural Network
- Yonggang Meng, State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, China
19:30-23:30 (4h)
› Steady-State Contact Temperature of Finite Bodies during Dry Sliding
- Tomaž Požar, Faculty of Mechanical Engineering, University of Ljubljana, Slovenia
19:30-23:30 (4h)
› Design and Shape Optimization of Valve Stem for Sealing Performance of Proportional Valve used in a Cold Gas Propulsion System
- Fırat Mehmet Günkan, Dept. of Mechanical Engineering, Istanbul Technical University, Turkey
19:30-23:30 (4h)
› Acoustic Emission and Frictional Analysis of Granular Material Systems
- Beikang Liu, Department of Mechanical Engineering, Imperial College London, United Kingdom
19:30-23:30 (4h)
› Degradation of Fluorinated Polymers/Lubricants due to Hyperthermal Nitrogen Collision in Very Low Earth Orbit
- Masahito Tagawa, Kobe University, Japan
19:30-23:30 (4h)
› The Tribological Investigation of the Thin Film Electrode Arrays
- Sercan Gökçeli, Dept. of Mechanical Engineering, Hacettepe University, Turkey
19:30-23:30 (4h)
› High-Temperature Fretting Behavior of Bi-Metallic (In718/L605) Superalloy Produced via Laser Powder Bed Fusion (L-PBF) Process
- C.H. Sathisha, GE Aerospace Research
19:30-23:30 (4h)
8:30 - 9:00 (30min)
Potentials and challenges in using AI for understanding and predicting sliding wear mechanisms
Room 1 - Saint Maur
Stefanie Hanke, Professor, University of Duisburg-Essen, Germany
8:30 - 9:00 (30min)
Tribocorrosion approach to wear of implants
Room 2 - Essarts
Anna Igual Muñoz, Senior Scientist, Tribology and Interfacial Chemistry Group, EPFL, Switzerland
8:30 - 9:00 (30min)
Rolling bearing lubrication with oil/refrigerant mixtures: a review with contributions
Room 3 - Amphitheater
Guillermo Morales-Espejel
9:00 - 9:10 (10min)
Short break (switch sessions)
9:10 - 10:30 (1h20)
Machine Learning - 2
Room 1 - Saint Maur
› Machine-Learning-Based Investigation of the Physical Source Mechanisms of Friction Brake Emissions
- Quentin Caradec, Univ. Lille, CNRS, Centrale Lille, UMR 9013 - LaMcube, France
09:10-09:30 (20min)
› Prediction of Chatter in Twin Disc Tribometers with Mode Decomposition Techniques
- Surya Kannan Peesapati, AC2T Research GmbH, Austria
09:30-09:50 (20min)
› A Machine Learning Strategy to Predict Dry Friction from Third Body Morphology
- Alizée Bouchot, LaMCoS, INSA Lyon, France
09:50-10:10 (20min)
› Data Reduction Techniques for Optimised Machine Learning Modelling of TEHL Contacts in Journal Bearings
- Samuel Cartwright, Mechanical and Aerospace Systems, University of Nottingham, United Kingdom
10:10-10:30 (20min)
9:10 - 10:30 (1h20)
3rd Bodies - 2
Room 2 - Essarts
› PolyTetraFluoroEthylene Lubrication in Highly Loaded Rolling Contacts – Influence of Operational Conditions
- Georgios Vokolos, Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Germany
09:10-09:30 (20min)
› Surface Modification of Polytetrafluoroethylene (PTFE) Fibers through Methyl Methacrylate (MMA) Polymerization for Self-Lubricating Composites
- Xuhui Sun, State Key Laboratory of Tribology in Advanced Equipment, Department of Mechanical Engineering, Tsinghua University, China
09:30-09:50 (20min)
› Nanol Additive as Antiwear and Friction Modifier
- Isabella Gair, FEPS, University of Southampton, United Kingdom
09:50-10:10 (20min)
› Study of Tribofilm Formation in a Sliding Electrical Contact: Correlation with Wear and Electrical Performance
- Timothée Doutriaux, LTDS UMR CNRS 5513, Ecole Centrale de Lyon & Everaxis Industries, France
10:10-10:30 (20min)
9:10 - 10:30 (1h20)
EHL - 1
Room 3 - Amphitheater
› A Fast Calculation Approach for Finite-Line Thermal EHL Contacts: Motivating Bearing Simulation Techniques
- Di Yang, Beijing Jiaotong University, China
09:10-09:30 (20min)
› Applicability of Winkler and FEM Models For ElastoHydroDynamic Analysis of Deformable Oil and Water-Lubricated Journal Bearings
- Ioannis Pervelis, National Technical University of Athens, Greece
09:30-09:50 (20min)
› Loss of Lubrication in an EHL Contact: a Numerical Approach
- Maxence Decote, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]
09:50-10:10 (20min)
› Novel Engineering Approach to determine the Electrical Capacitance of Machine Elements with Line Contacts
- Volker Schneider, Institute of Machine Design and Tribology (IMKT), Leibniz University Hannover, Germany
10:10-10:30 (20min)
9:10 - 10:30 (1h20)
Rolling Contact Fatigue - 1
Room 4 - Le Chateau
› Modelling of surface crack propagation under lubricated rolling sliding contact
- Liang Guo, SKF Research & Technology Development, The Netherlands
09:10-09:30 (20min)
› The Effect of Hydrogen Concentration on Surface-Initiated Damage in Rolling Contacts
- Lisa-Marie Weniger, Luleå University of Technology, Division of Machine Elements, Sweden
09:30-09:50 (20min)
› Lubrication Effect on Laboratory Scale Wheel-Rail Contact
- Thibault Lesage, IRT Railenium, France
09:50-10:10 (20min)
› Stress Intensity Factors Analysis for a C-Crack in a Ceramic Roller Subjected to Representative Bearing Service Loads
- David Degbe, DMAS, ONERA & Université Paris Saclay, Centre des Matériaux, France
10:10-10:30 (20min)
10:30 - 11:00 (30min)
Coffee break
Poster and Exhibition room
11:00 - 12:20 (1h20)
Mixed Lubrication - 1
Room 1 - Saint Maur
› Self-Lubricating Composites: Effects of Sizing and Mixed Lubrication on Tribological Performance
- Jose Daniel de Mello, Universidade Federal de Uberlândia - UFU & Universidade Federal de Santa Catarina = Federal University of Santa Catarina, Brazil
11:00-11:20 (20min)
› Tribofilm Formation Characteristics of ZDDP and DDP Additives and their Effect on Interfacial Friction
- CANCELLED - Haichao Liu, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
11:20-11:40 (20min)
› Tribological Behavior of CuO@RGO Nanoparticles under Different Slide-Roll Ratio
- Salete Alves, Universidade Federal do Rio Grande do Norte, Brazil
11:40-12:00 (20min)
› Influence of Small Electric Potentials on the Performance of Rolling-Sliding Lubricated Contacts
- Ammad Yousuf, Imperial College London, United Kingdom
12:00-12:20 (20min)
11:00 - 12:20 (1h20)
Green Tribology - 2
Room 2 - Essarts
› Investigation of Using Microbubbles to Reduce Friction in Journal Bearing
- Yuki Yoshimura, Tokai University, Dept of Mechanical Engineering, Japan
11:00-11:20 (20min)
› Tribological Performance of DLC Under Minimised Lubrication
- Liuquan Yang, University of Leeds, United Kingdom
11:20-11:40 (20min)
› Experiments and Analysis of Loosening of Cone and Thread Fittings for High Pressure Hydrogen Systems
- Joichi Sugimura, Kyushu University, Japan
11:40-12:00 (20min)
› Experimental Characterization of the Tribological and Acoustic Performance of Different Stern Tube Bearing Materials
- Georgios N. Rossopoulos, National Technical University of Athens, Greece
12:00-12:20 (20min)
11:00 - 12:20 (1h20)
EHL - 2
Room 3 - Amphitheater
› The Infulence of Multiple Oil Tracks on Starved Elastohydrodynamic Lubrication
- Yasuo Matsuzaki, NSK Ltd., Japan
11:00-11:20 (20min)
› Lubrication of a Truncated Circular EHL Contact
- Tristan Patrigeon, LaMCoS, INSA Lyon, France
11:20-11:40 (20min)
› Heat Transfer during Hydrodynamic Lubrication in a Half-journal Bearing
- Humberto Medina, Mechanical and Aerospace Systems, University of Nottingham, United Kingdom
11:40-12:00 (20min)
› A Novel Method for the Simultaneous Measurement of Grease Film Thickness and Cage Rotational Speed in Rolling Element Bearings
- Fabio Tatzgern, AC2T Research GmbH, Austria
12:00-12:20 (20min)
11:00 - 12:20 (1h20)
Fretting
Room 4 - Le Chateau
› The Study of Debris Formation in Fretting Wear of a High Strength Steel using Crossed-Cylinder Experiments
- Allan Gichuki, MAS, Faculty of Engineering, University of Nottingham, United Kingdom
11:00-11:20 (20min)
› Towards Robust Calculations Axial Blade/Disk Attachments
- Ben Kabondo Kashala, LaMCoS, INSA Lyon & Safran Aircraft Engines, France
11:20-11:40 (20min)
› Damping Behaviour of Different Metals under Fretting Conditions
- Marion Kugler, Fraunhofer Institute for Mechanics of Materials & Institute for Applied Materials, Karlsruhe Institute of Technology, Germany
11:40-12:00 (20min)
› Tribological Behaviour of Fe-10Cr-4Al at Elevated Temperatures under Different Environmental Conditions
- Daria Kolbas, Luleå University of Technology, Sweden
12:00-12:20 (20min)
12:20 - 13:50 (1h30)
Lunch
Restaurant
13:50 - 15:30 (1h40)
Mixed Lubrication - 2
Room 1 - Saint Maur
› On the Relation Between Friction and Multiscale Surface Roughness in Mixed Lubrication
- Charlotte Spies, Robert Bosch GmbH & University of Freiburg, Germany
13:50-14:10 (20min)
› Influence of a Transmission Oil Degradation on System-level Behavior
- Busra Duran, SKF, France
14:10-14:30 (20min)
› On the Electric Behavior of Conductive Grease inside the Contact Zone
- CANCELLED - Liu Jinjie, Qingdao University of Technology, China
14:30-14:50 (20min)
› Alteration of Stribeck and Traction Curves of Lubricants due to Electrification
- Leonardo Farfan Cabrera, Tecnológico de Monterrey = Monterrey Institute of Technology, Mexico
14:50-15:10 (20min)
› Self-Lubricating Fabric Composites Enhanced by the Microcapsules to Improve the Tribological Properties
- Zhaozhu Zhang, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Lubricant Additives - 2
Room 2 - Essarts
› Carbon Dot-Based Ionic Liquids: a Novel Additive for Lubrication and Corrosion Inhibition Application
- CANCELLED - Songwei Zhang, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
13:50-14:10 (20min)
› The Formation and Wear Resistance of Tribofilms Derived from Anti-Wear Additives using In-Situ AFM Observation
- Yumi Hayashi, Sumitomo Heavy Industries, Ltd & Tokyo University of Science, Japan
14:10-14:30 (20min)
› The Effects of DC and AC Electrification on the Tribology of Gear Materials Lubricated by ICE and EV Targetted Additive Packages
- Joshua Armitage, University of Leeds, United Kingdom
14:30-14:50 (20min)
› Evaluation of Ionic Liquids and Nanoparticles for Nanoscale Film Fabrication Harnessing Tribochemistry
- Yuyang Yuan, University of Leeds, United Kingdom
14:50-15:10 (20min)
› Harnessing the Synergistic Potential of SiO2 and Cu Nanoparticles as Lubricant Additives for Enhanced Tribological Efficiency
- Syed Junaid, Indian Institute of Technology Delhi, India
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Friction & Wear - 3
Room 3 - Amphitheater
› Wear of Directed Energy Deposited H13 Steel as a Function of its Graded Microstructure
- Mohamed El Mansori, Arts et Metiers Institute of Technology, MSMP, HESAM Université, France
13:50-14:10 (20min)
› Wear Properties of Multi-Principal Element Alloys
- Thon Thongklom, Department of Materials Science and Engineering, University of Sheffield, United Kingdom
14:10-14:30 (20min)
› Understanding the Corrosion and Wear at Nanoscale Interface
- CANCELLED - Zhijiang (Justin) Ye, Miami University, United States
14:30-14:50 (20min)
› Analysis of Seizure Interface between Steel Crank Journal and Aluminum Alloy Plain Bearing
- Takumi Iwata, Tokyo City University, Japan
14:50-15:10 (20min)
› Effect of Porosity on Surface Deformation and Subsurface Layer Produced by Scratch Tests of Sintered Low-Alloy Steel
- Roberto Souza, University of São Paulo, Brazil
15:10-15:30 (20min)
13:50 - 15:30 (1h40)
Coatings - 1
Room 4 - Le Chateau
› Bridging Experiments and Computations to Advance Friction Reduction in Lubricant and Coating Synergy
- Takeru Omiya, University of Coimbra, Portugal
13:50-14:10 (20min)
› Influence of Hydrogen-Containing Atmospheres on Friction and Wear of Diamond-like Carbon under Reciprocating Sliding
- David Zeradjanin, Robert Bosch GmbH & Universität Siegen, Germany
14:10-14:30 (20min)
› Atomic-Scale Mechanisms of Superlubricity with Diamond-Like Carbon Coatings and Silicon-Based Ceramics
- Gianpietro Moras, Fraunhofer IWM, MikroTribologie Centrum, Germany
14:30-14:50 (20min)
› Analysis of Tribologically Induced Changes in ta-C Coatings
- Dominic Linsler, Fraunhofer Institute for Mechanics of Materials, Germany
14:50-15:10 (20min)
› Friction Reduction by the Combination of Xylitol Solution and DLC Coating
- Masaya Fukuda, Tokyo City University, Japan
15:10-15:30 (20min)
15:30 - 16:00 (30min)
Coffee break
Poster and Exhibition room
16:00 - 17:00 (1h)
Mixed Lubrication - 3
Room 1 - Saint Maur
› Friction of Hybrid Ball Bearings Operating in Mixed Lubrication
- Jeroen Wensing, SKF Research and Technology Development, The Netherlands
16:00-16:20 (20min)
› Interactions between Surface-Active Additives and Effects on the Wear Protection of Rolling Bearings
- Merle Reimers, Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Germany
16:20-16:40 (20min)
› Predicting Friction in Total Hip Replacement Bearings: a Multiscale Approach
- Robin Furze, University of Leeds, United Kingdom
16:40-17:00 (20min)
16:00 - 17:00 (1h)
Lubricant Additives - 3
Room 2 - Essarts
› Triacetin as Lubricant Additives: Friction Measurement between Metal Pairs
- Fida Majdoub, LabECAM, ECAM La Salle, Université de Lyon, France
16:00-16:20 (20min)
› The Effect of Esters on Wear and Tribofilm Formation in Electric Vehicle (EV) Lubricants
- Johann Watson, University of Leeds, United Kingdom
16:20-16:40 (20min)
› Ammonia Fuel Engines: the Change of Tribological Behavior for the Cylinder Liner-Piston Ring
- Zetong Wang, Harbin Engineering University, China
16:40-17:00 (20min)
16:00 - 17:00 (1h)
EHL - 3
Room 3 - Amphitheater
› Lubrication of Rolling Bearing in the Starved Regime by Droplet on Demand
- Norbert Bader, University of Twente, The Netherlands
16:00-16:20 (20min)
› Polymer Congestion and Shear Thinning in EHD Contact
- Bastien Bolle, Department of Mechanical Engineering, Imperial College London, United Kingdom
16:20-16:40 (20min)
› Changes of Aqueous Solution of Polyethylene Glycol Film Thickness in EHD Contacts
- Tomáš Poláček, Brno University of Technology, Czech Republic
16:40-17:00 (20min)
16:00 - 17:00 (1h)
Coatings - 2
Room 4 - Le Chateau
› Investigation into the Asperity Persistence of the Rough Surface with a Hard Coating Layer
- Keita Inose, Department of Mechanical Engineering, Imperial College London, United Kingdom
16:00-16:20 (20min)
› Tribofilm Formation Process from ZDDP on Manganese Phosphate Coatings with Different Surface Roughness of Underlying Steel
- Saiko Aoki, Tokyo Institute of Technology, Japan
16:20-16:40 (20min)
› Tribological Aspects of Bolted Assemblies in Light Constructions
- Wieslaw Grabon, Rzeszow University of Technology, Poland
16:40-17:00 (20min)
17:00 - 17:10 (10min)
Short break (switch sessions)
17:10 - 18:10 (1h)
Mixed Lubrication - 4
Room 1 - Saint Maur
› High Friction of Rubber Caused by Negative Fluid Pressure under Glycerol Lubrication and its Underlying Mechanism
- Arata Ishizako, Tohoku University, Japan
17:10-17:30 (20min)
› Development of a Repeatable, Accurate Chain Drives Dynamometer
- Robert Wragge-Morley, University of Bristol, United Kingdom
17:30-17:50 (20min)
› Lubrication Dynamics Coupled Modeling of a Three-Dimensional PRCL System with Consideration of Piston Influence
- Lining Gao, Shanghai Jiao Tong University, China
17:50-18:10 (20min)
17:10 - 18:10 (1h)
Biotribology - 2
Room 2 - Essarts
› Friction Modulation of Catheters using Ultrasonic Waves
- Mostafa A. Atalla, TU Delft, The Netherlands
17:10-17:30 (20min)
› MXene-Reinforced CoCrMo Composites for Biotribological Applications Fabricated by Additive Manufacturing
- Sangharatna Ramteke, Pontificia Universidad Católica de Chile, Chile
17:30-17:50 (20min)
› Antibacterial Effect of Soft-Metal DLC Nanocomposite Coatings for Highly Durable Antibacterial Adhesive Tape
- Minoru Goto, National Institute of Technology, Ube College, Japan
17:50-18:10 (20min)
17:10 - 18:10 (1h)
Coatings - 3
Room 4 - Le Chateau
› Role of Probe Vertical Lift in Polymer Brush Friction and Wear
- Hikaru Okubo, Yokohama National University, Japan
17:10-17:30 (20min)
› Effect of Traces of Ethanol Airborne Contamination on the Tribological Behaviour of SnO2 Coating
- Guillaume Colas, Université de Franche-Comté, CNRS, institut FEMTO-ST, France
17:30-17:50 (20min)
› Multimodal Measurement of Polymer Brush Superlubric Interface
- Daiki Kagiwata, Yokohama National University, Japan
17:50-18:10 (20min)
17:10 - 18:10 (1h)
Space Lubrication - 3
Room 3 - Amphitheater
› Performance of the Antiwear Additives under Lubricant Immersion Condition in Vacuum
- Takashi Yokoyama, Japan Aerospace Exploration Agency, Japan
17:10-17:30 (20min)
› Optimizing Labyrinth Seal Geometry to Minimize Liquid Lubricant Evaporation in Space Systems
- Josef Pouzar, Brno University of Technology, Czech Republic
17:30-17:50 (20min)
› Frictional Torque Characteristics of PFPE Lubricated Ball Bearings under Oscillatory Motion in Vacuum
- Kazuaki Maniwa, Japan Aerospace Exploration Agency, Japan
17:50-18:10 (20min)
18:30 - 23:55 (5h25)
Banquet at Paul BOCUSE (l'Abbaye de Collonges)
8:30 - 10:10 (1h40)
Gears - 1
Room 1 - Saint Maur
› Impact of the Surface Finish on Gear Tooth Friction
- Matthieu Cordier, LaMCoS, INSA Lyon, France
08:30-08:50 (20min)
› Experimental and Simulation Analysis of oil-air Two-Phase Flow Characteristics in High-Speed Bearings
- Chunhui Wei, LaMCoS, INSA Lyon, France & Beijing Institute of Technology, China
08:50-09:10 (20min)
› How Hybrid Thermal Model can Take up the Chalenges of using Temperature for Fault Detection in Geared Systems
- Thomas Touret, ECAM LaSalle, LabECAM, France
09:10-09:30 (20min)
› Evaluating Lubrication Regimes of Spur Gear Meshing using Electrical Impedance Method
- Asuka Watanabe, Yokohama National University, Japan
09:30-09:50 (20min)
› A New Formulation for Convective Heat Transfer in Oil Jet Lubricated Spur Gears
- Thibaut Torres, ECAM LaSalle, LabECAM & INSA Lyon, LaMCoS, France
09:50-10:10 (20min)
8:30 - 10:10 (1h40)
Lubricant Additives - 4
Room 2 - Essarts
› Zinc DialkylDithioPhosphates Adsorption and Dissociation on Ferrous Substrates: an Ab Initio Study
- Francesca Benini, Department of Physics and Astronomy, Alma Mater Studiorum—University of Bologna, Italy
08:30-08:50 (20min)
› Effects of Tribofilm derived from Sulfur/Phosphorus-based Additives on Pitting/Wear Resistance of Bearing Steel during Rolling Friction
- Yunah Jeung, Tokyo University of Science, Japan
08:50-09:10 (20min)
› Tribological Performance of SEC-C6 CuDTP and Characterization of its Tribofilm
- Noriko Ayame, Lubricants R&D Dept, ENEOS Corporation, Japan
09:10-09:30 (20min)
› Functionalized Graphene Quantum Dots from Residual Oil Fractions as Additives for Electric Vehicle Conductive Lubricants
- Youssef Alashkar, King Abdullah University of Science and Technology, Saudi Arabia
09:30-09:50 (20min)
› Investigation of Tribochemical Reactivity of DLC Coatings by Combining Electronic Spectroscopies (XPS/AES/REELS) and Microscopy (FIB/TEM/EELS)
- Aslihan Sayilan, LTDS, Ecole Centrale de Lyon, France
09:50-10:10 (20min)
8:30 - 10:10 (1h40)
Hydrodynamic Lubrication - 1
Room 3 - Amphitheater
› Investigation of the Affect of Oil Pocket Geometry on the Performance of Journal Bearings using a CFD-TEHL Model
- Layton James, Mechanical and Aerospace Systems, University of Nottingham, United Kingdom
08:30-08:50 (20min)
› Effect of Surface Tension in Two-Phase Lubricated Contacts
- Noël BRUNETIERE, Institut Pprime, France
08:50-09:10 (20min)
› Design and 3D CFD Analysis of Bio-Inspired Grooves and Pillars Micro-Structures for Enhanced Drag Reduction of Thin Films
- Nikolaos Rogkas, Laboratory of Machine Design and Dynamics, National Technical University of Athens, Greece
09:10-09:30 (20min)
› On the Shape of Surface Texture
- Xiaolei Wang, Nanjing University of Aeronautics and Astronautics, China
09:30-09:50 (20min)
› CFD Analysis of the Unsteady Compressible Flow in an Orifice Restrictor of a Gas Bearing
- Mihai Arghir, Institut Pprime, France
09:50-10:10 (20min)
8:30 - 10:10 (1h40)
Coatings - 4
Room 4 - Le Chateau
› Frictional Anisotropy under Scratching Test for Molybdenum Thin Films Deposited by Glancing Angle Deposition (GLAD)
- Guilherme Rodrigues, Institut FEMTO-ST, Université de Franche-Comté, France
08:30-08:50 (20min)
› Tribological Behavior of a Graphite-Phenolic Resin Solid Lubricant at High Loads
- Omar Zouina, Karlsruhe Institute of Technology (KIT) & Institute for Applied Materials (IAM), MicroTribology Center μTC, Germany
08:50-09:10 (20min)
› Intelligent Lubricating Coatings Based on the Oblique Angle Deposition Technology
- Shusheng Xu, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
09:10-09:30 (20min)
› Impact of Structural Defects on Nanotribological Behavior of Chemical Vapor Deposited WS2 Monolayers
- Himanshu Rai, Czech Technical University in Prague, Czech Republic
09:30-09:50 (20min)
› Superlubricity – Role of Surface Texture and Graphene-Based Coatings under Colloidal Lubrication: Focus on Hypericin
- Paul-marie Zubieta-Laborde, LTDS, Ecole Centrale de Lyon, France
09:50-10:10 (20min)
10:10 - 10:40 (30min)
Coffee break
Poster and Exhibition room
10:40 - 12:20 (1h40)
Gears - 2
Room 1 - Saint Maur
› Modeling and Analysis of Relative Fatigue Life under 3D Mixed Lubrication in Marine Helical Gears
- Renze Li, Harbin Engineering University, China
10:40-11:00 (20min)
› Method for Testing Surface Fatigue using Non-Circular Specimens with Instationary Sliding Conditions
- Jaacob Vorgerd, Ruhr University Bochum = Ruhr-Universität Bochum, Germany
11:00-11:20 (20min)
› Effects of the Heat Treatment on Fatigue Wear of Gear Steel under Rolling/Sliding Contacts
- Hayato Monzen, Tokyo University of Science, Japan
11:20-11:40 (20min)
› Investigation of Micropitting Occurence Following Crack Propagation under E-Axle Lubricant
- Kaito Yoshioka, Tokyo University of Science, Japan
11:40-12:00 (20min)
› Effect of Roughness on Micropitting: a New Geometric Analysis
- Abdellah Marzoug, Safran Transmission Systems & LaMCoS, INSA Lyon, France
12:00-12:20 (20min)
10:40 - 12:20 (1h40)
Surface Topography - 3
Room 2 - Essarts
› Experimental Investigation on The Effect of Roughness and Wettability on Tribological Properties of Metallic Surfaces Prepared by EDM
- Dimitrios Skondras-Giousios, Laboratory of Manufacturing Technology, School of Mechanical Engineering, National Technical University of Athens, Greece
10:40-11:00 (20min)
› Patterned Surface Contact for Macro Scale Engineering Superlubricity
- Aaron Sinnott, Trinity College Dublin, Ireland
11:00-11:20 (20min)
› Metainterfaces: How to Design Rough Contacts with Specified Friction Laws?
- Julien Scheibert, LTDS, CNRS, Ecole Centrale de Lyon, France
11:20-11:40 (20min)
› Factors that Influence the Triboelectric Charging of Textured Plastic Slabs in Conformal Contact
- Cosmina Chiujdea, Institut Pprime, France & University Politehnica of Bucharest, Romania
11:40-12:00 (20min)
› Exploring Tire/Rail Friction: Contaminated Cases
- Bilel Jebali, Laboratoire Environnement, Aménagement, Sécurité et Eco-conception, Université Gustave Eiffel, France
12:00-12:20 (20min)
10:40 - 12:20 (1h40)
Physics of Friction
Room 3 - Amphitheater
› Macroscopic Low-Friction via Twinning Assisted Lattice Reconstruction in Magnesium
- Xiang Chen, Nanjing University of Science and Technology, China
10:40-11:00 (20min)
› Experimental Measurenent of Strain Distribution in Silicone Rubber Bulk during Friction against a Stainless-Steel Sphere
- Toshiaki Nishi, Tohoku University, Japan
11:00-11:20 (20min)
› A New Mechanism of the Interfacial Water Film Dominating Low Ice Friction
- CANCELLED - Weimin Liu, State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
11:20-11:40 (20min)
› Stiffness and Damping of Rubber in Sliding Contact Determined by Resonance Curves
- Shintaro Hatanaka, Yokohama National University, Japan
11:40-12:00 (20min)
› Modeling and Designing the Electrical Contact of Sliding Interfaces
- Song Aisheng, State Key Laboratory of Tribology in Advanced Equipment, Tsinghua University, China
12:00-12:20 (20min)
10:40 - 12:20 (1h40)
Biotribology - 3
Room 4 - Le Chateau
› Hydrogels Prepared from Ovomucins: an Easy-to-Access Model for Mucus Tribology
- Seunghwan Lee, University of Leeds, United Kingdom
10:40-11:00 (20min)
› Polymer Brushes for Biolubrication
- CANCELLED - Bin Li, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, China
11:00-11:20 (20min)
› Wear Characteristics of Ultra-High Molecular Weight Polyethylene on Production of Inflammatory Cytokine
- Yoshitaka Nakanishi, Kumamoto University, Japan
11:20-11:40 (20min)
› Tribology in the Soft World: Compliant Boundaries and Complex Environment
- Carlos Drummond, Centre de Recherche Paul Pascal, Université Bordeaux 1, France
11:40-12:00 (20min)
› Surface Modification of NanoMOFs with Microgels for Aqueous Lubrication and Drug Release
- CANCELLED - Jianxi Liu, Northwestern Polytechnical University, Xián, China
12:00-12:20 (20min)
12:20 - 13:50 (1h30)
Lunch
Restaurant
13:50 - 15:10 (1h20)
Mixed Lubrication - 5
Room 1 - Saint Maur
› Tribological Investigation of Friction Behavior of Piston Ring-Cylinder Liner Under the Effect of Ammonia-dispersed Engine Oil
- Emir Yilmaz, Sophia University, Tokyo, Japan
13:50-14:10 (20min)
› Revealing the Role of Structure and Boundary Conditions in Friction Reduction with Tribocolloid Lubricants
- Abhishek Kumar Gupta, IoP, University of Amsterdam, The Netherlands
14:10-14:30 (20min)
› Measurement of Adsorption and Friction Properties of Additives by Vertical-Objective Type Ellipsometric Microscopy
- Kenji Fukuzawa, Nagoya University, Japan
14:30-14:50 (20min)
› Friction Response of Laser Generated Stochastically Distributed and Ordered Textues for Rigid and Compliant Counterpart Contact
- Paul Butler-Smith, Manufacturing Technology Centre, United Kingdom
14:50-15:10 (20min)
13:50 - 15:10 (1h20)
Hydrodynamic Lubrication - 2
Room 2 - Essarts
› Study of Cavitation Pressure on Textured Surface in Mechanical Seals
- Masatoshi Itadani, Eagle Industry Co. Ltd., Japan
13:50-14:10 (20min)
› Influences of Local Temperatures on the Performance of Surface Structures
- Norbert Bader, Delft University of Technology, The Netherlands
14:10-14:30 (20min)
› Study on Cavitation Occurrence in High-Speed Hybrid Water-Lubricated Thrust Bearings
- Yuki Minagawa, Tokyo University of Science, Japan
14:30-14:50 (20min)
› Improvement in Measurement Accuracy of Oil Film Distributions on Piston Skirt using Sapphire Glass Cylinder
- Yasuhiro Ishikawa, Tokyo City University, Graduate School of Integrative Science and Engineering, Japan
14:50-15:10 (20min)
13:50 - 15:10 (1h20)
Rolling Contact Fatigue - 2
Room 3 - Amphitheater
› Surface-Initiated Rolling Contact Fatigue on a Dent: Microstructural Evolution and Effects on the Failure Mechanism
- Aurore Goigoux, NTN Europe & LaMCoS, MATEIS, INSA Lyon, France
13:50-14:10 (20min)
› Using Ultrasound to Measure the Inlet Meniscus Position and Starvation Ratio of a Rolling Element Bearing Contact
- Will Gray, University of Sheffield, United Kingdom
14:10-14:30 (20min)
› Tribological Properties and Performance of a Novel Aeroengine Bearing Steel Arctic15
- Jean-Baptiste Coudert, SKF Aerospace, France
14:30-14:50 (20min)
› The Effect of Electrical Current on Tribological Contact
- Grigore Cernalevschi, Faculty of Engineering and Physical Sciences, University of Southampton, United Kingdom
14:50-15:10 (20min)
15:10 - 16:10 (1h)
Friction & Wear - 4
Room 1 - Saint Maur
› Vat Photopolymerization 3D Printing of Self-Lubricating Polymer Composites
- Xiaolong Wang, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences & Shandong Laboratory of Advanced Materials and Green Manufacturing at Yantai, China
15:10-15:30 (20min)
› Wear Study of Tire Tread Materials under Low-Severity Wear Conditions
- Cloé Chanal, IMP, CNRS, INSA Lyon & LTDS, CNRS, Ecole Centrale de Lyon, France
15:30-15:50 (20min)
› Contact and Friction Behavior on Soft-Hard Contact Interface under Mechanical Stress Conditions
- Shuyan Yang, Qingdao Tribology Group, State Key Laboratory of Solid Lubrication, China
15:50-16:10 (20min)
15:10 - 16:10 (1h)
Friction & Wear - 5
Room 2 - Essarts
› Solid Particle Erosion of Aluminium Alloy of Aircraft Fuselage Skin
- Ezequiel Gallardo-Hernández, Instituto Politecnico Nacional, Mexico
15:10-15:30 (20min)
› Investigating the Influence of Flake-Shaped Particles on the Frictional Behavior of Materials
- Parissa Alavi, LSMS, EPFL, Switzerland
15:30-15:50 (20min)
› Evolution of the Seismic Fault – Asperity System through the Lens of Pin-On-Disk Experiments
- Adriane CLERC, LaMCoS, INSA Lyon, France
16:00-16:10 (10min)
15:10 - 16:10 (1h)
Thermal Effects
Room 3 - Amphitheater
› Effect of Tribotesting Scale on the Understanding of High Temperature Tribology of Tool Materials
- Gabriel Macêdo, Luleå University of Technology, Sweden
15:10-15:30 (20min)
› Enhanced Lubrication Performance of PFPE with TMFS-Modified MoS2 under High-Temperature Conditions
- Yunze Li, Tsinghua University, China
15:30-15:50 (20min)
› Friction and Wear of AAR Class D Wheel Steel Sliding against High-Strength Rail Steel at Temperatures up to 700 °C
- Nathan Stray, Universidade Federal do Espirito Santo, Brazil
15:50-16:10 (20min)
16:10 - 16:20 (10min)
Short break (switch sessions)
16:20 - 16:50 (30min)
Award and Closure session
Room 3 - Amphitheater
